EVOSTi
29th September 2009, 01:49 PM
i have an MS112 housing which i was gonna use for my sprinter but have decided to stay with my E series for the time being. it has not had the mounts swapped over yet. come with both axles, backing plates, disc, shoes, calipers etc basically complete diff minus the center. one thing i have to add is the splines on the axles are a little pitted, so you may want to swap these for piece of mind or just go with them.
these diffs are 1450mm wide so obviously your wheels will be out a further 20mm each side if you dont shorten it, i was just planning on rolling the guards.
also worth noting is these diffs have huge bearings, bigger than most F series and they also have an internal oil control sleeve near the center.
chasing $200 for the lot. pics can be arranged, located in camden but can bring to work during business hours in Ingleburn.
these diffs are 1450mm wide so obviously your wheels will be out a further 20mm each side if you dont shorten it, i was just planning on rolling the guards.
also worth noting is these diffs have huge bearings, bigger than most F series and they also have an internal oil control sleeve near the center.
chasing $200 for the lot. pics can be arranged, located in camden but can bring to work during business hours in Ingleburn.