will these rims bolt straight up to an ae86

[slider4life]

hi guys just wanted to know if a set of 15x8 inch rims would bolt straight up to an ae86 with -15 offset as im interested in purchasing a set just not sure if i need to doo gaurd mods ect thanks for the help

[Rice86]

stock suspension and brakes?..

for front or rears?...im sure these will fit rears 100%..fronts not to sure but im guessing it will still work

and make sure its not for stud pattern 4x100, cause then that will be fail lol

[Shahzan]

stock suspension and brakes?..

for front or rears?...im sure these will fit rears 100%..fronts not to sure but im guessing it will still work

and make sure its not for stud pattern 4x100, cause then that will be fail lol

hehe, sell the 4x100 to Corrolla owners, they would buy them... :DD

[slider4life]

yeah its for front and rear same size and offset

[Rice86]

well sounds like good offset rims...buy it..if u need to roll the gaurds then let it be, should be worth it in ur eyes, no one else can tell you what to think

[ke_70]

measure it up use your brain

[redsprinter]

no.....

[hachi_dk]

i have 14x8 -10 and they are too wide even for the rears (by about 1 or 2cm each side) and thats with a t series diff

my front end has 330mm LCA's and with the 14x8 -10 would require guard flares no doubt.

15x8 -15 would need guard work for sure

[Rice86]

great thread...now i know what size rims i need to suit my flared guards, 15x8 -15 or bigger =D

[blair]

this is 14 x 8 -15.
all guards have been hammered out only just enough to keep a nice curve in the guards.

you can make them work with stock rolled guards i reckon, but hey its completely dependant on how low you wanna go, and how much camber you wanna run up front
keep in mind this is <80mm at the rails and 185's with 3deg camber

http://www.ae86drivingclub.com.au/dcimages/1/4/9/25777.jpg

[redsprinter]

ive got 15x7.5 -6 in the rears running 195/55/r15 and they fill stock guards. my car is lowered but not stupid low ...scrubs when there is passengers in the back seat .

[cbjaust]

So with unmodified guards what fits? And what is with the superlite hate?

[blair]

So with unmodified guards what fits? And what is with the superlite hate?

fucks sake.

give me a stock hachi and i will fit 15 x 12's on the thing!

[haydenz]

just roll/hammer inner guard lip until flat. May scrub a little...only with 4 pricks in the car or big bumps

[ae86]

doesnt need heaps of work but its not flush exactly, really depends on height of car.

[Clinton]

I have 15x9 -6 not rubbing on unflared front guards just lipped. Height at the sill is ~90mm

[Buck]

i have 15*8-10 on the rear, 195/50, needs the guards lipped slightly

[Touge Boy]

fucks sake.

give me a stock hachi and i will fit 15 x 12's on the thing!

Hell yeah! I rock 15 x 10 -12 on heavily flared UNCUT metal....

[Delazy]

http://www.ae86drivingclub.com.au/dcimages/1/0/1/4/29828.jpg

15x9-12 with 195/50's....believe the lips may have been ever so slightly rolled :)

[Mr Fujiwara]

my car is stupidly low, and the rears rub over big bumps, 15x8.5 -8 with 195 50, guards just had a maglite shoved between the tyre and rim, it pushed guard out a tiny bit and lipped it at the same time

[lo_rolla]

I got 15x9 -18 stock gaurds...

Mind you, they don't actually fit.... not properly anyways.

[Richard]

ya breast bet would be 15x8 0offset front, 15x8 -4offset rear. 195/50tyres. purrrrfect fitment

[.ady]

http://www.ae86drivingclub.com.au/dcimages/1/0/1/4/29828.jpg

15x9-12 with 195/50's....believe the lips may have been ever so slightly rolled :)

how the? rear guards look like they havnt been touched! what height on spring?

[Delazy]

how the? rear guards look like they havnt been touched! what height on spring?

believe they are cut supra springs of some sort...but yeh...definately fits :)