aussierider
13th December 2009, 11:56 AM
Location : Griffith NSW
Hey all
I've got a complete bolt in set up for those wanting for negative camber in there front end. it consists of
*sigma LCA's - decent condition, bushes and ball joints still in good condition,
*ae86 steering arms- good condition
*Ae86 tie rods - good condition- no play
*unknown rack ends - good condition still very tight, there much longer then stock(almost 3x time the length at a guess) so you can still get usable adjustment using stock tie rods.
Just guessing these gave me about -3' to -4' of camber and 30mm a side extra track, If you run alot of caster and 15x8 +4 wheels you will have to cut and flare your guards for clearance. this setup put 15x6.5 -10 flush with my rolled front guards.
PRICE : $100.00 would cost about 30.00 to post I think, but I'll get a proper quote for any one looking at buying.
Hey all
I've got a complete bolt in set up for those wanting for negative camber in there front end. it consists of
*sigma LCA's - decent condition, bushes and ball joints still in good condition,
*ae86 steering arms- good condition
*Ae86 tie rods - good condition- no play
*unknown rack ends - good condition still very tight, there much longer then stock(almost 3x time the length at a guess) so you can still get usable adjustment using stock tie rods.
Just guessing these gave me about -3' to -4' of camber and 30mm a side extra track, If you run alot of caster and 15x8 +4 wheels you will have to cut and flare your guards for clearance. this setup put 15x6.5 -10 flush with my rolled front guards.
PRICE : $100.00 would cost about 30.00 to post I think, but I'll get a proper quote for any one looking at buying.