PDA

View Full Version : [SYD] 4AG JDM Package + Bits


Wally
18th January 2009, 11:25 AM
Hi guys,

Engine / Gearbox is ready to go. I will have Exhaust / ECU / Loom available in a couple of weeks.

Item 1:
Engine (Complete):
Stock JDM Blue Top 16V Bigport from my Trueno
- Head completely rebuilt 10k kms ago (cost $1300)
- Crank Seal replaced
- Serviced every 5000kms since I have had it (May 07)
- TRD Ignition Leads (Clear type)
- Intake Manifolf + Pod Filter
- NO Dizzy
- Starter Motor hasve been removed, they will be included loose though.
- Last Timing belt was done in Japan at 157k
- km on odometer 221k. Due for a service in 1000kms.

In my possession it has not been over revved / seen track / just a daily driver. Ran smooth, came out of car a couple of weeks ago.

including:
Gearbox:
Stock JDM T50
- Gearbox Oil changed three times in 18months.
- Stock clutch/flywheel
- Feels good

99% Package ready to go. Just need a Dizzy, everything else should be there.

Price: $1300.00 ONO - Available now!!!

Item 2:
Exhaust:
- Stock Exhaust Manifold + 2.5" Stainless (bit dirty) + Resonator + Legal Muffler (Not loud) + comes with Kakimoto Cannon (LOUD)
- Over diff.

Price: $400.00 ONO

Item 3:
Loom:
- Should be complete since getting full rewire + spare near complete loom
- JDM ECU - 4ag Bigport

Price: $150.00 ONO


I am open to offers for the whole package (items 1+2+3 together).
No trades
Pickup Only for big stuff.

Other Items:
New Stainless Surge Tank (2L?) - $70
New RCi Fuel Cell with foam Model 2080B (30L (approx 420mmx420mmx210mm) - $150 ONO
Custom Rad Overflow Stainless thingymabob - $50


Pictures so far:

http://i22.photobucket.com/albums/b323/WaLLLY/DSCF3425_resize.jpg
Note: Does not come with TRD Oil Cap and the Ignition Leads are the clear TRD type ones.

http://i22.photobucket.com/albums/b323/WaLLLY/10112007231_resize.jpg

http://i22.photobucket.com/albums/b323/WaLLLY/DSCF2868_resize.jpg

http://i22.photobucket.com/albums/b323/WaLLLY/DSCF3849.jpg

http://i22.photobucket.com/albums/b323/WaLLLY/DSCF3847.jpg

http://i22.photobucket.com/albums/b323/WaLLLY/DSCF3846.jpg

http://i22.photobucket.com/albums/b323/WaLLLY/DSCF3843.jpg

http://i22.photobucket.com/albums/b323/WaLLLY/DSCF3842.jpg


Im in SOUTH WEST SYDNEY near Campbelltown Region.

Can meet up for small bits, pick up for engine and shit though.

PACKAGE 1 IS AVAILABLE NOW!



Will update this post in due course.

Cheers.
evil86
18th January 2009, 11:31 AM
quick question, wherer does the overglow bottle mount to?. im registering most interest in it
Wally
18th January 2009, 11:56 AM
quick question, wherer does the overglow bottle mount to?. im registering most interest in it

It was made to fit in a KE70 at the left front of the engine bay.

I still have mine original in so can't trial fit it.

if it doesnt line up there, there is a threaded hole between overflow bottle and headlight which it could bolt to and maybe a slight modification for the bottom fixing tab.
Golberg
18th January 2009, 08:55 PM
So what happened to the dizzy anyway?
Wally
18th January 2009, 09:43 PM
I used the one from my old engine (which is up for sale) on the new engine.
munki
18th January 2009, 10:07 PM
i will take the overflow bottle if its still there... send me a pm with total post to 4271

cheers

Daniel
Wally
19th January 2009, 05:43 AM
Still available daniel,

I shall shoot you a pm tonight :)
Wally
19th January 2009, 06:18 PM
For this week the Engine/Gearbox and be picked up in Fairfeld Area (Its currently at my mates workshop). Has engine hoist there and can get it on your trailer/ute easy as!
R&D Mechanical
19th January 2009, 07:21 PM
fuel cell to SA 5039? neg price via PM


cheers mate!
Wally
19th January 2009, 07:57 PM
fuel cell to SA 5039? neg price via PM


cheers mate!

pm'd mate.
Wally
19th January 2009, 08:02 PM
i will take the overflow bottle if its still there... send me a pm with total post to 4271

cheers

Daniel

PM sent also.
R&D Mechanical
15th February 2009, 11:43 PM
hey mate didnt recive your PM, thanks mate
WiLo
16th February 2009, 03:53 PM
did the new motor not come with a dissy?
special price for me for engine loom computer and exhaust please:D
sotiros86
16th February 2009, 05:07 PM
Is the "Custom Rad Overflow Stainless thingymabob" to suit an ae86? If so, ill take it, PM me your details. Also, is the pod enclosure for sale?

Cheers
Wally
16th February 2009, 07:44 PM
did the new motor not come with a dissy?
special price for me for engine loom computer and exhaust please:D

New engine did come with a dizzy, but used my old on as we knew it worked... and I am keeping the other one as a spare.


Is the "Custom Rad Overflow Stainless thingymabob" to suit an ae86? If so, ill take it, PM me your details. Also, is the pod enclosure for sale?

Cheers

Mate, to be honest not sure. It was fitted to a KE70. So if the holes line up around there it could fit. I do have a guy interested however that said he was going to be paying tomorrow for it.