[VIC] WTB standard air intake

[cbjaust]

need to buy or borrow a standard AE86 4AGE airbox intake setup for RWC.

[ae86]

doubt you will find one, best off getting one of those aftermarket caseings from autobarn

[cbjaust]

what other options are there to get by for a RWC?

[44GTE]

Hi

Have the standard setups available

$165 + post

PM if intereted

Cheers

[Bluterus]

Hey man my old man owns a steel fab company and I run it if you want can make you up an airbox from pretty much any material I got lying around all you need to do is get the piping. RWC only states the filter must be enclosed. I made one for my missus's bro's soarer from brushed stainless it looked awesome.

Only prop is you'd have to come to the S.E suburbs can just throw something together for you for free just to get you past roady.

[cbjaust]

Yeah, thanks for the offer but I grabbed the standard intake from Craig (44GTE - see avobe post) and have the RWC now and I'll probably keep the standard Air intake setup for now. However would you be able help with fabricating the bracket that supports the inlet pipe on the radiator? See it on the diagram below marked 17872:
http://www.toyodiy.com/parts/diag_ZfynE.png (http://www.toyodiy.com/parts/p_J_1983_TOYOTA_COROLLA+LEVIN_AE86-ECMQF_1703.html)
Click the diagram to go to the ToyoDIY page and the part no of the bracket is 17872-16010.

Cheers

[Bluterus]

I thought you may have already found something but it didn't say so so thought i would offer.

That bracket should be pretty easy. What size bolts does it use to bolt into the car? Or would you not care and just Tek screw it in?

Just need to know the bolt size so I know what size holes to punch and then I just need some width measurements.
http://img532.imageshack.us/img532/9237/ae86bracket.jpg

Or you could just come round one day and we could make it on the spot but I'm happy with whatever man.

[cbjaust]

I thought you may have already found something but it didn't say so so thought i would offer.

That bracket should be pretty easy. What size bolts does it use to bolt into the car? Or would you not care and just Tek screw it in?

Just need to know the bolt size so I know what size holes to punch and then I just need some width measurements.
http://img532.imageshack.us/img532/9237/ae86bracket.jpg

Or you could just come round one day and we could make it on the spot but I'm happy with whatever man.

It'd be good to just come round one day and sort out a bracket. Pm me your details and I'll get in touch..

Cheers