View Full Version : Quads for beams ( 20v or 3sge)
DR86TY
3rd November 2010, 09:00 AM
Hey all,
As stated im chasing a quads setup for my beams, looking for 20v quads and adapter plate with TPS.
Let me know if any of you bandits have them :)
Regards
Dave
0421 869 080
Andy San
4th November 2010, 08:47 AM
PM Glenn (Celica RA45) he will have some
DR86TY
9th November 2010, 12:54 PM
adapter is sweet ill grab one of glen, but still need quads with tps :)
ke_70
9th November 2010, 12:56 PM
standed beams tps is the same as 20v.
Celica RA45
9th November 2010, 06:33 PM
std beams tps is different you need the20v silver or black top tps to make it work
ke_70
9th November 2010, 06:45 PM
aaaaaahhhhhhhh
mabey thats whats wrong with mine?
Celica RA45
9th November 2010, 07:08 PM
have you been a tight arse and tried to use the altezza 1
ke_70
9th November 2010, 07:16 PM
i didnt get one with my quads and the beams one looks the same as everyone elses i saw.
figred theyre the same. plugs into the loom to.
Celica RA45
9th November 2010, 07:23 PM
you need 1 that finishes with either 80 or 90 in number on the side of tps ,thats what probaly been your problem on start up
fantapants
9th November 2010, 07:26 PM
but the adap uses a learning function for the tps signal??? so it shouldnt really matter should it?
i i cant remember if i used the one of the beams or the one of the 20v, but if i fluked it thats great lol
Celica RA45
9th November 2010, 07:36 PM
the 20v 1 s turn the other way im sure and the resistence is different as well as its moving smaller opening agianst bigger opening on the altezza
DR86TY
9th November 2010, 08:55 PM
well the adaptronic loom as a 20v tps on it so ill need the 20v quads then ill be sweet. if any one has them i would like to them :)
steroidchickens
9th November 2010, 09:28 PM
i am using beams one.
fantapants
9th November 2010, 10:14 PM
yer i thought either you or me had the beams one :)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.