RWD BT20v conversion

[stixy]

hi all,


I'm currently doing a BT 20v build, i am at the stage where i am converting it all to RWD, i.e dizzy(going coilpack) and water, now i know there are allot of kits out there that you can buy to convert all of this to RWD but what i want to know is who has what and who is happy with theirs?

my dad once told me "do a job right and do it once"

i have looked thorugh the xE7x and the ae86 owners section but have not really found what im looking for.

any help would be great.

thanks

[Todd]

get the RS CHITA water kit and be done with it.

nothing is better in regards to complete packages, quality of parts supplied, and cleanliness and ease of install.

in regards to ignition and loom etc, speak to anthony from kaizen garage. his shit is top notch (have seen it in person on two different setups locally) and his loom is to die for.

If going individual coil packs, speak to Sam-Q and go from there. he makes a nice mounting plate and also a nice rear water backing plate which has come up many times in the discussion of rwd 20v setups.

hope that helps.
cheers

[haveaparty]

message sam-Q for water parts, his look good and and are way cheap, may even do a deal for ya if u buy all the stuff in one go and dont fuck him around, hopefully i pick mine up from the post today

[stixy]

get the RS CHITA water kit and be done with it.

nothing is better in regards to complete packages, quality of parts supplied, and cleanliness and ease of install.

in regards to ignition and loom etc, speak to anthony from kaizen garage. his shit is top notch (have seen it in person on two different setups locally) and his loom is to die for.

If going individual coil packs, speak to Sam-Q and go from there. he makes a nice mounting plate and also a nice rear water backing plate which has come up many times in the discussion of rwd 20v setups.

hope that helps.
cheers

nice one, thanks Todd. i have spoken to Anthony about what he has to offer and i was very impressed, will be definitely be going that way in regards to loom and ECU.

who stocks the RS CHITA water kit here in Australia?

[70XIN]

If it were me i'd probably go Sam-Q's stuff. Heaps cheaper.

You don't have to spend double the price just to get a very similar chunk(s) of machined alloy. But if brand really matters, the RS-chita kit really is the "best". I have a GARAGE ANNEX kit that's amazing, but i don't think it's very cheap.

[Sam-Q]

thanks guys, stixy do yourself a favor and click on the link in my signiture, even if you don't buy any parts I have some articles on there that will help you.

I should be able to sell 1NZ coilpacks within a week, this should mean I have just about everything you need bar the trumpets.

Overall I think I have the best kit out of anyone, although I do really like the top outlet pipe of the RS Chita kit.


Here are 3 pics to see some of what I offer:

http://www.ae86drivingclub.com.au/dcimages/2/5/2/27337.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/2/57885.jpg

http://www.ae86drivingclub.com.au/dcimages/2/5/2/27338.jpg


I also offer a full backup in terms of help needed to fit them and any issues that might come up. I am yet to have an unhappy customer.

Otherwise I think Vision-R sells the RS Chita kit.

[Delazy]

i have a rs-chita kit solely due to the quality/neatness of the top outlet pipe...if i wasnt so pedantic id certainly go with the gear that samq is selling...

[kaibeecee]

id recommend anthony's setup (KZG). he's done dozens of them (mine included) and it all looks and runs factory. everything from the external thermostat housing to the CAS cover (seen in samq's first image) is good

[Sam-Q]

i have a rs-chita kit solely due to the quality/neatness of the top outlet pipe...if i wasnt so pedantic id certainly go with the gear that samq is selling...

I can undertsand this as I always thought mine looked crude, did you know I sell Yager pipes as well though?

http://www.ae86drivingclub.com.au/dcimages/2/5/2/57895.jpg

[Sam-Q]

id recommend anthony's setup (KZG). he's done dozens of them (mine included) and it all looks and runs factory. everything from the external thermostat housing to the CAS cover (seen in samq's first image) is good

depends on which one your getting, he used to do this C&C rear bypass which was great but the last person I hear of who had a conversion done by him had an OEM thermostat that was just chopped, hollowed out and welded shorter- it ended up leaking. The rewelded bullhorn pipe looks ok to me however I am still not convinced that it doesn't cause air locks on initial filling, although that isn't a big issue. I am obviously a fan of the dizzy covers and hence why I sell them.

[stixy]

thanks to everyone who has given their 2c worth, i have a bit of my own research to do but i think i am convinced that Sam-Q is the man to talk to about it all.

[Gunner]

sams the man

[ae8620v]

i have 4 coils for sale if you want also have a dizzy cap, if you still have your comlete dizzy, coil and leads i would be interested in a swap??? if keen txt 0405988601

[Delazy]

I can undertsand this as I always thought mine looked crude, did you know I sell Yager pipes as well though?

yeh, ive noticed that...

ive suggested them to a couple peeps of late 2...

but id still pay out my arse to get the rschita peice...but thats me...ive put more money into my motor than most have a complete car on here...

http://www.ae86drivingclub.com.au/dcimages/7/1/26163.jpg

[Adsie]

If you going with Adaptronic make sure he puts the voltage divider other wise it probably won't rev past 7000k rpm. http://adaptronic.com.au/forum/index.php?topic=235.0

[Sam-Q]

yeh, ive noticed that...

ive suggested them to a couple peeps of late 2...

but id still pay out my arse to get the rschita peice...but thats me...ive put more money into my motor than most have a complete car on here...

http://www.ae86drivingclub.com.au/dcimages/7/1/26163.jpg

this has to show how I am not biased: I still love this outlet and it's a pity I can't justify getting something like this made.