rear disc brake conversion

[Hyuga]

got any idea of which model's rear disc brake discs and calipers can be bolt on to T-18 diff?
also, would like to know if MA61 front disc brake can be modified to suit sprinter's front, thanks to all 86 experts here again http://www.ae86drivingclub.com.au/forums/emoticons/wink.gif


Edit: should be MA61 not MA70, no wonder noone is answering my qs http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif

[Hyuga]

can i... bump..? http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[caps]

hey mate i am pretty sure the s13 silvia rear discs and calipers can be bolted on to the rear... i think anyway they are the same stud patern but you may have to modify the handbrake

[RobertoX]

R31 works, but if you want to go the toyota route, speak to sam q on toymods he did a nifty little conversion

[funkymonkey]

FC RX7 brakes also work

[slydar]

I NEED TO DO THIS CONVERSION REAL QUICK, read 'dodgy brakes' as in my rears are dis-conected/clamped off and l need disc's quick, HAS ANYONE DONE THIS BEFORE OR CAN GIVE ME THE EMAIL ADDRESS OF SOMEONE WHO HAS, cheers

to fit a t-18

[rthy]

I have done a conversion on mine but it cant be copied so easy. I used a Corona disk and a ae-82 corolla caliper, nothing fits on easy onto a T-18 as far as I know. An R31 skyline or sylvia setup might be a good start, watch out for clearences off the lower control arm though with the handbrake. BTW can you use a welder?

[Hyuga]

anyone know which brakes off S13 will/will not clear under 14" rims? as I know there r 3 different kinds, Sr20 turbo, sr20 nonturbo and ca18
someone list all three types and front and rear pls

Thanks

[slydar]

Originally posted by Sam_Q@Jun 14 2005, 04:15 AM
I have done a conversion on mine but it cant be copied so easy. I used a Corona disk and a ae-82 corolla caliper, nothing fits on easy onto a T-18 as far as I know. An R31 skyline or sylvia setup might be a good start, watch out for clearences off the lower control arm though with the handbrake. BTW can you use a welder?
(brett typing) yeah l can use a welder, why?

[seek]

Brett should make your own account up lol..............

[rthy]

I asked if you own a welder because nothing fits on. I still recomend trying some s13 gear, I can't promise it will fit but it looks likely. Also theres heaps more room available if you run traction brackets, or if you a bit loopy like me you just extend the brackets on the diff housing.

[dori_86]

how easy are the S13 conversion on the rear?? has anyone done it themselves and like to post a guide

[rthy]

http://forums.toymods.org.au/index.php?t=m...d875dd70a214606 (http://forums.toymods.org.au/index.php?t=msg&goto=685672&rid=4385&S=573a8e831e0e3a17dd875dd70a214606)

leave it alone man

[dori_86]

it seems like more trouble than it's worth? is there a better solution??

[rthy]

for an IRS setup? no, theres no realistic solution. For some rear disk brakes it likes like S13 silvia brakes are the best bet.

[funkymonkey]

i'll be doing a 4 stud HCR32 one on mine

[rthy]

whats a hcr32?

[Beserker99]

Originally posted by Sam_Q@Jul 7 2005, 08:47 PM
whats a hcr32?
I believe it's a 4 door R32 SKyline.

[dori_86]

would you be able take pics and do a write up for a guide to doing the swap that would be grearly appreciated

cheers

[screech]

ill make up a tech article is someone can supply me required parts for this S 13 rear brake upgrade for me to try and fit on my own car

ill take it on and make it work, love that custom shit! http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif