S13 camber tops

[defect]

Hey guys
just wondering if I can use S13 front suspension for my corolla, could I also use the camber tops?
I got a pair of camber tops from my S13, Ive sold the car already but still got the camber tops. My plans were to have S13 suspension at the front. Just wondering will the camber tops fit or do I need to get a new pair

[anastasios]

so do u have a corolla or a ae86?

[exquisit]

they r the same shit
=)
corolla = ae86

[defect]

yeh toyoto corolla levin sprinter ae86 takumi, they thats what they are called.


anyone knows if s13 camber tops fit a ae86 if it had s13 suspension on the front.

[RB20DET_Silvia]

Cut out one of the holes a little bigger becuase its like a couple mm's off....alot of people do that with no issues.

- Luke

[defect]

cheers for that Luke

[flamingheads]

If you say corolla you could mean you have an AE71/82/86/92/101 KE10/20/30/70 etc.
Call it a sprinter or an ae86

[.wolfwood]

is it dodge to make the hole bigger or doesnt treally matter?

[RB20DET_Silvia]

If u do it right it wont cause any issue to be honest.

-Luke

[defect]

flamingheads: thanks for a the tip :/

Luke; I think mine already had S13 camber tops because I remember one of the holes were bigger already

[flamingheads]

defect: you're welcome http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif

[rthy]

i was ganna do something similar, redrill holes and use s13 strut bar or similar

[slide86]

i was ganna do something similar, redrill holes and use s13 strut bar or similar[/b]
s13 strut bar would be different lenght.

[rthy]

yea just shorten it

[defect]

cutting a s13 front strut brace to fit a 86?
now thats customisin

[Gilly]

makes sense when you can pick em up 2nd hand for dick all

[SR20_AE86]

ill be using s13 camber tops but yeah not to shore what im doing for a strut brace, ethier modify an 86 one or cut an s13 one.

[defect]

whichever is cheaper to come by hey

[Joel-AE86]

You need to cut/shut your lower control arms to fit S13 suspension into an ae86/KE70/AE71, as the S13 ones are too wide at the top to fit into the crossmember, plus they are like 50mm longer than standard!

[defect]

is cut/shut your lower control arms illegal for street?
what other ways?

[Joel-AE86]

is cut/shut your lower control arms illegal for street?
what other ways?[/b]

Some dude reckoned ages ago on this forum that it can be done without cutting control arms...but I cant see how its possible. There isnt much more room to redrill the holes in the crossmember further back to decrease the track and resultant camber of running 50mm or so longer arms.

My conrol arms on my setup have been cut with a plate welded to the ended and a hole drilled and tapped with a rose joint and adjusting nut attached. A much better setup than having a bush, and you get a reasonable amount of arm length adjustment.

I dont imagine redrilling strut top holes and running S13 shit would be considered legal on the street either.

Who gives 2 farks about the majority of modification legalities to their car? I know living in SA...i dont!

[mc68]

u can fit s13 arms no wukkas joel...just use mx83 control arms...(same as jzx81)