Toyota Sprinter AE86 Fibreglass Replacement Dash Skin Part 2 Final Product - Still For Sale Starting Production

[DRFTN86]

Toyota Sprinter AE86 Fibreglass Replacement Dash Skin Part 2 Final Product

Why Pay $400 for a vinal retrim?
No more ugly cracks, peeling or tearing!!

$260 each + Not included is Postage and Handling (if requiring delivery)
GOT EVERYONE WE NEED! STILL FOR SALE THOUGH!

This dash skin is easy to install but if you want it fitted to your dash and live in the Brisbane area, fitting can be arranged for $60.

Tools required to install dash:
• G-clamps
• 3 Tex Screws (These are supplied and the cost is already included)
• 227 Sikaflex

This dash skin is made using good quality materials sourced from FGI (Fibreglass International). It has been fitted to the AE86 in the photo and looks great!

Extra Info:
The fiberglass dash skin sits in place of the original dash skin, no alterations to anything need to be made as it is a straight swap, all vents, clocks etc. fit back into original positions without hassle.
All holes come pre cut to allow for easy fitting.
The fiberglass dash skin is sprayed black straight out of the mold.
You must makes sure when you install this product you remove all of the old vinal or this replacement will not fit properly, as it is a direct replacement, the clock area we have found needs special attention.

NOTE:
THIS PRODUCT IS AN AFTERMARKET PRODUCT AND OBVIOUSLY WILL NEVER FIT AS WELL AS THE GENUINE PRODUCT.

Any further enquiries or questions can be directed to Anthony on 0422775272
You are also welcome to come and look at Anthony's 86 to see how well the dash fits.
Anthony is also willing to swap a Dash Replacement Skin for drift parts for his 86.

If your interested leave your name and number.

Pickup: Darra, Brisbane
Delivery: Anywhere in Australia at buyers expense.


http://img363.imageshack.us/img363/1893/86upload001qh0.th.jpg (http://img363.imageshack.us/my.php?image=86upload001qh0.jpg)
http://img172.imageshack.us/img172/4950/86upload002rf5.th.jpg (http://img172.imageshack.us/my.php?image=86upload002rf5.jpg)
http://img353.imageshack.us/img353/6616/86upload006tn8.th.jpg (http://img353.imageshack.us/my.php?image=86upload006tn8.jpg)
http://img165.imageshack.us/img165/4047/picture034qi0.th.jpg (http://img165.imageshack.us/my.php?image=picture034qi0.jpg)

[Granto]

Wow, looks like a great product.

[bahnugget]

so it just goes on over the top of the old foam pad?

[genkin]

nope, rip that foam shit out and just put in the FRP shell

[riceburner]

So remove the old Vinyle, take all that foam crap of and sika-flex this fibreglass piece on

Seems easy enough!

Yo think the dash would need to come out for this.

Steve

[DRFTN86]

So remove the old Vinyle, take all that foam crap of and sika-flex this fibreglass piece on

Seems easy enough!

Steve[/b]

Thats It!!!! Come on guys these dash's look great when installed! Surely there aren't many of you out there with perfect dash's that aren't cracked or torn??

[sanchez]

good price and the product looks the goods. count me in

[DRFTN86]

good price and the product looks the goods. count me in[/b]

Send me a PM with your name and number and we'll put u down for one.

[PuGZoR]

Woo, I'm getting one. These look fricken great, I must say that these ones look a fair chunk better than the pics in the old thread, heh. Definatly worth the money. Not worth getting the stocko repaired for that kinda cash. Will make for a more solid base for gauges, etc, too I'd imagine.

[riceburner]

Would the dash need top be removed for this you think. It would make it alot easier thou.

Steve

[OBE353]

thats sik, good on yas for doin this shit....very interested

[ae86 slide]

count me in for one in about 2 weeks

[DRFTN86]

Would the dash need top be removed for this you think. It would make it alot easier thou.

Steve[/b]

Yes it is alot easier if you remove the dash. Easy to do.

[DRFTN86]

Only 14 More People To Go. We will start producing these dashs once we have approximately 15 people interested, which means we only need 9 more people, so tell your friends guys.

Thanks

[Brenton 86]

Im very keen but i have the worlds only remaining blue uncracked, unfaded dash so ill see if i can sell that first

[DRFTN86]

Only 8 more people until we start making these guys, come on surely you could all use a replacement for the old cracked and ugly vinyl crap!!

[Matt-AE86]

I thought this would have been to replaced the WHOLE dash, but its just a fibreglass skin ?

[DRFTN86]

I thought this would have been to replaced the WHOLE dash, but its just a fibreglass skin ?[/b]

Yes its just a skin, why replace the whole dash http://www.ae86drivingclub.com.au/forums/emoticons/huh.gif when you can make it look better for cheap?

[Granto]

Carn guys!

make that splinter look new again http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif on the inside anyway.

looks so fresh.

i can't wait to take my stock one out, that has 50 cracks in it, and give it to a crackhead.

Grant.

[PuGZoR]

I thought this would have been to replaced the WHOLE dash, but its just a fibreglass skin ?[/b]
I think we need to clear up the terminology here, heh.

The dash is the instruments, clock, wiring, basically everything that's between the driver / passenger and the firewall. The stock "dash skin" usually cracks and looks crap because of that, hence, we're replacing the skin which is the plastic bit with a fibreglass replica. You will need to unbolt/unscrew the stock "dash skin" and remove it to replace it with this new one.

Essentially, it's like having a new dash with the same shape, and made of a different material.

Oi, what's the possibility of having carbon fibre models made? http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

[DRFTN86]

<{POST_SNAPBACK}> (index.php?act=findpost&pid=260586)

I thought this would have been to replaced the WHOLE dash, but its just a fibreglass skin ?[/b]
I think we need to clear up the terminology here, heh.

The dash is the instruments, clock, wiring, basically everything that's between the driver / passenger and the firewall. The stock "dash skin" usually cracks and looks crap because of that, hence, we're replacing the skin which is the plastic bit with a fibreglass replica. You will need to unbolt/unscrew the stock "dash skin" and remove it to replace it with this new one.

Essentially, it's like having a new dash with the same shape, and made of a different material.

Oi, what's the possibility of having carbon fibre models made? http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif
[/b]

Thanks for that, the chance of a carbon fibre model is slim but were looking at doing, the materials cost more and its alot harder to work with. We're going to try one soon and if all goes well you guys will have the option of getting one but it will be dearer, we'll let you know.

Cheers Guys

Still need 8 more people guys lets go!!!!

[DRFTN86]

Bumpski

[tan18d]

How long would it take to remove the old dash and then put this one in?

[PuGZoR]

A lazy sunday afternoon I'm guessing. http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[Matt-AE86]

I thought it would have been a weight reduction type of thing, remove the whole dash and put this in its place, but its still a great idea http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[ae86 slide]

dude the whole dash weighs fuck all, (it is only plastic after all)
actually now im thinking about it, a complete fibre glass replacement may even be heavier depending on how much resin is used.
it really is only a cosmetic thing.
im down for one of these,
also just rember guys with this replacement skin it will never crack from the sun again, so its a once of price for a perfect dash for the rest of your cars life.

[PuGZoR]

Because it's actually painted, and not just coloured plastic, it will probably be less likely to fade too....

DRFTN86 - How many we need now? I'm really really keen, I'd hate to see this fall through.

[Gilly]

i'm down for one, pick up too

[DRFTN86]

Because it's actually painted, and not just coloured plastic, it will probably be less likely to fade too....

DRFTN86 - How many we need now? I'm really really keen, I'd hate to see this fall through.[/b]

We now have 8 People we need 7 more before we would ideally like to start producing, i'll be talking to Anthony today about this.

Come on guys surely u need replacements!

http://www.ae86drivingclub.com.au/forums/emoticons/2thumbs.gif

[mrceffy]

hey,

did you count me in already?

[DRFTN86]

hey,

did you count me in already?[/b]

Have now, can you pm me your name and number, spoke to anthony tonight guys, we'll start producing when we get to 12 people. thats only 3 MORE PEOPLE GUYS! Come on!!!

[DRFTN86]

3 More People before we start production, once we start production expect the dash's at your door in a week and a half, less time for pickup!

Thanks

Matt

[Granto]

*points flat hand at face*

COME ON!!! http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

http://www.ae86drivingclub.com.au/forums/emoticons/hammer.gif

[DRFTN86]

*points flat hand at face*

COME ON!!! http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

http://www.ae86drivingclub.com.au/forums/emoticons/hammer.gif[/b]

Does anyone want 2?? http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[Granto]

not for the price ;(

otherwise i'd consider it. hah.

[DRFTN86]

BUMPSKI come on guys!!

[DRFTN86]

We're starting production very shortly guys!!! we'll be in contact with you in the next few days!!

Jently i still need your name and number.

Thankyou all for your support.

Matt

[Gilly]

BOOYAH!!!!

[dctrd]

Hi, i'm new, i'm keen, PM sent for postage cost ect.

[mick22]

Is this the first and only run thats being manufactured?, or is there the opportunity to buy one in say a few months???

[DRFTN86]

Is this the first and only run thats being manufactured?, or is there the opportunity to buy one in say a few months???[/b]

Most probably the first and only run unless significant interest is posted in the future.

WE have started production and will be able to tell you what your postage will cost 2mrrw guys!!!

Thanks for your patience

Matt

Anyone who hasn't pmed me your name and number please do asap!

Ponkotsu
Sanchez
Pugzor
OBE353
Granto
AE86 Slide
4agze-hachisaurus
Gilly
Jently

These guys i have your names and numbers!!!

[ae86 slide]

im all over the pickup, so just give me a call wen its done,
cheers

[Gilly]

^^ likewise

[mick22]

Im In, sent PM http://www.ae86drivingclub.com.au/forums/emoticons/tup.gif

[dctrd]

Is the gelcoat tinted black, or do you paint them?

Otherwise, any colour you want, as long as you want black? http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[dctrd]

Bump.

Any word on postage prices?

[DRFTN86]

Hey all,

Update we've popped out 3 dashs so far, and were continuing production, we'll be sending them out all at once. THe dash weighs approximately 900g so you can obtain you individual postage quotes if you wish.

Matt

[mick22]

Hey Matt,
Just wanna make sure you got my order?
thanks

[spilmer]

pm'd details put me down for one

[DRFTN86]

Updated List
Ponkotsu
Sanchez
Pugzor
OBE353
AE86 Slide
4agze-hachisaurus
Gilly
Jently
Joellae86
Wiggles
Delazy
Spilmer

I have your details and hopefully your dashs should be at your doors or ready for pickup in no more then 2 weeks!!!

Keep em coming guys we can do as many as these as you want.

Thanks for all your support

Matt

[ae86 slide]

good to hear mate,
slightly off topic but are you guys still going to be doing the hatches and bonnets?

[sanchez]

i should be able to pay for this within the next week or 2.

[Gilly]

got cash and shit now yo!! put me down for one of the first, i'll even do a how to fit guide for you, and put it up here somewhere

[mrceffy]

so whats happening now?

[DRFTN86]

so whats happening now?[/b]

Where still in the process of making them, only 4 more to go http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif should be done by next weekend hopefully!!!

[mick22]

So hows it all goin, lookin foward to getten my dash... http://www.ae86drivingclub.com.au/forums/emoticons/biggrin.gif

[ponkotsu]

Whats the News Guys, my Baby needs a new dash....

[DRFTN86]

Hey guys, sorry bout the delay ant and myself have been rather sick over the past few weeks, the dashes are slowly coming along again now. so hopefully we should have them out to you soon, sorry about the delay!!!

[stouty]

PM'd

[Gilly]

cool. this $260 is burning a hole in my pocket. i know they are on the way now so i'll get the finance manager (Mrs) to hide it from me again.......

[stouty]

Can i still order one or is it to late????

[DRFTN86]

You Can Still Order, were just running behind schedule on making them, both anthony and myself work full time so we pop these out when we can!

[stouty]

Put me down for one then thanks.

[defect]

any rough idea how much postage would be to Sydney 2167?
Send me a private message. Cheers

[PuGZoR]

Any news??

[Victor Vance]

you can put me down to get one

[PuGZoR]

What's happening? Can we get our update on? I realise you guys are busy and whatnot, heh, just want to know what's crackin'. Hopefully it's not the dash skins. http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[sanchez]

i'm still keen as anything to get one of these babies.

[Gilly]

i'm out, sent you a pm anyway.

[mick22]

any news guys???

[PuGZoR]

I think we've been forgotten about. http://www.ae86drivingclub.com.au/forums/emoticons/sad.gif

[stouty]

Yeh im keen as mustard to get mine.

[RU4-86Drift]

can i still order one or am I to late really need one, not worried about weighting for one.

[DRFTN86]

Where still going ahead guys, i've been flat out at work and anthony doesn't have internet access, were trying to get these done asap, sorry for the delay, i will try and catch up over the next few days with orders and details and what not. Sorry for the inconvenience.

[DRFTN86]

All problems and queries please refer to the mobile number attatched as I will be unable to continue to monitor this website, if you have ordered a dash please re send your details to anthony and confirm delivery time. Thanks

[stouty]

I cant see any mobile number attached and who is anthony? Anyone that knows the infomation can they PM me. Thanks

[PuGZoR]

I cant see any mobile number attached and who is anthony? Anyone that knows the infomation can they PM me. Thanks[/b]
Ditto.

[Stain]

Any further enquiries or questions can be directed to Anthony on 0422775272[/b]

Ant works at Kaizen Garage. Has done countless conversions on 86s, makes custom parts for 4AGE 20v installations and owns a 3SGE powered Trueno. http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[mick22]

Any further enquiries or questions can be directed to Anthony on 0422775272[/b]

Im not sure that is Anthony Kellam he's talking about?

But any way, so that means that there all done and ready to be sent out???

[ae86 slide]

i hate to do this but im out,
crashed my car a week ago so im strapped for cash,
sorry for the stuff around

[stouty]

I'm really lost so what exactly is going on???

[PuGZoR]

Yeah, it's a different Anthony. Anthony at Kaizen is mech, this other Anthony is ex-jetspeed, and still a panel'ie by trade I think? Who knows...

[DRFTN86]

All you need to do, is to send a sms to 0422775272, with your name, address and you want a dash, anthony will be looking at sending out the first seven very shortly. so the first seven that get there details to him will get there dash's first, i've now had to resort to public computers lol

[ponkotsu]

Mate am still willing and whating for news on dash, the waiting is getting tiresom please get these out or I'm sure alot of buyes will back out.Please pm me with update on delivery time.Ponkotsu. http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif

[mick22]

Mate am still willing and whating for news on dash, the waiting is getting tiresom please get these out or I'm sure alot of buyes will back out.Please pm me with update on delivery time.Ponkotsu. http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif[/b]

I agree. Been waiting a long time... http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif

[Gilly]

Mate am still willing and whating for news on dash, the waiting is getting tiresom please get these out or I'm sure alot of buyes will back out.Please pm me with update on delivery time.Ponkotsu. http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif http://www.ae86drivingclub.com.au/forums/emoticons/dry.gif[/b]

give the mobile number a call.

this guy owes you no favours, and he clearly states he has limited access to computers. you replying here and him not being on a computer doesn't really work does it?

[xtacy]

sorry about the long ass wait guys!
orders have been stacking up as the weeks come.
please do understand that there will be a long wait for these dashes as there is only one person making all of these dashes, to also top it off he has orders for front bars, rear bars and side skirts stacking up as well.

as gilly stated my mate has limited access to a computer let alone the internet! i will try to discuss with him if he is able to distribute some of these dashes that have been finished to those who have been waiting.

cheers xtacy

[dctrd]

You mean he's got better things to do than make our stuff? http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

It's fair enough dude, let us know when you hear more.

[xtacy]

Lol! nah he's genuinly busy lol.....i would help him but he hasn't gotten around to teaching me how to glass properly yet!:(
stupid orders http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

will keep you all updated:)

[xtacy]

ok guys heres the message from my mate.

Hey guys

Sorry about the wait on the dashes. Just updating you that we have made only eight so far and the reason it's taking so long is because I am the only one making them cuz my partner is gone away on holidays. As you can see they are straight out of the mould and haven't had time to even prep, cut vent holes and paint them black. Please be patient cuz I do have other work beside making dashes and other orders to fill. The materials are coming out of my own pocket so I haven't even taken any deposits on dashes. ANT.

Ok guys heres what's gonna happen.
Because there are 8 dashes that are almost ready to send out, what i'll do is the first 8 people to give me thier details through pm. will get these 8 dashes sent to them!

Sorry about the long ass wait
Cheers Xtacy, DRFTN86 and Ant.

http://img150.imageshack.us/img150/766/dsc05796fy1.th.jpg (http://img150.imageshack.us/my.php?image=dsc05796fy1.jpg) http://img225.imageshack.us/img225/5578/dsc05797ts7.th.jpg (http://img225.imageshack.us/my.php?image=dsc05797ts7.jpg)

[xtacy]

Come on guys! First 8 people to provide me with their details will get their long awaited dashes! Payment will be sorted after we get your details.....We are hoping to send these dashes off start of next week or mid next week!

[mick22]

PM'd

[xtacy]

Cheers joelae86...come on people what happend to the interest that we first got! theres 5 more remaining at the moment!

[DR71FT]

I have one of the first ones he made a while back in my car. They look awesome you wont be dissapointed.

[xtacy]

I have one of the first ones he made a while back in my car. They look awesome you wont be dissapointed.[/b]

Exactly RIGHT! These dashes are a great alternative to changing the whole dash! It's cheap and it looks great, after installed! Not only that but it is ALOT lighter than the original dash which is great for those that are into all that power to weight stuff!
Come on guys this is a great product for sale! And better yet, it's in most of the forum members price range!

[xtacy]

BUMPIDEE!

[marvin]

Can he do one in carbon fibre, if so I will take one straight up.

Jon

[xtacy]

Can he do one in carbon fibre, if so I will take one straight up.

Jon[/b]

hey jon
unfortunately he won't be able to do it in carbon fibre, he is able to do it BUT it would have to be dodgey work because it's just not what he specialises in.....yes carbon fibre is the same process as fibreglassing but theres some smaller detail of the process which he doesn't know to make it a perfect product.
Also Ant does not F*%K around when he is producing products for customers.

so either way your getting a great product, whilst looking good in the car and which is alot lighter than the original.

[xtacy]

BUMP!

[PuGZoR]

Sent an SMS to Anthony just then. (I'm in the Philippines at the moment but will be back in Brissy on Monday)

[DRFTN86]

BUMP

[DRFTN86]

BUMPSKI!

[Jazz9]

Can i get one ?

[danni_d]

how much to ship to melbourne?

[mick22]

Hey guys whats goen on, any word when there going to be sent out?

[dctrd]

Bump!
Any word yet?
I'm still keen as!

[PuGZoR]

Still being made up as far as I know.

[Sprinter_Seth]

come on man this is getting a bit over the top. i have rung u a few times now and i have been told that they just need to have the holes cut out then they are ready. That was 3 weeks ago. Is there any chance that these have actualy been done yet or what. i got cash waiting, im sure everyone here wants to know whats going on.

[DRFTN86]

These are ready now, anyone who has contacted ant in the last day he should have your address details, anyone who hasn't txt him your details now http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif postage will be a maximum of $50 australia wide bubble wrap being an extra $10. THe dashs will be left in white primer so you can paint them any colour you want. Any queries call anthony. Those who have arranged pickup call anthony to arrange a time.

Cheers

P.s Leigh Stout ant has lost your details so plz txt him them again