HKS cams

[chapl]

For sale: HKS CAMS with 272 duration.... 8 mm lift

Condition: good nic... used... done no more than 1000km..

Price and price conditions: 650 ONO

Extra Info: great upgrade for your 4age... if you want pics jus say... negotiable on price

Contact Details: pm me

Location: south aus yo

Delivery & Conditions of Delivery: pick up or delivery at your expense

[Gilly]

as in they were new but now have less than 1000klms on them?

hmmmmmm...........

no!!!, naughty!!!, naughty boy!! stop looking!!.......

http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif

[RyGuy86]

were these in your car?


PICS!!!

[deanoo]

PICS!!!

[chapl]

as in they were new but now have less than 1000klms on them?

hmmmmmm...........

no!!!, naughty!!!, naughty boy!! stop looking!!.......

http://www.ae86drivingclub.com.au/forums/emoticons/tongue.gif[/b]

fixed for ya



pics soon...

prob wed or thurs

[roadsailing]

7mm lift, are you sure? thought they were closer to 8mm.

tentatively interested, are they both exahust cams?

[genkin]

being HKS product,
both are interchangable with exhaust side (dizzy gears on both)

combine these with an aftermarket ECU and you should have an easy 150Hp+

BTW: as far as I can tell, HKS main (only?) 272° cams are 8.35mm lift.
(part number 2202-RT033 is the 272, 8.35 cams)

The lift shouldnt be too hard to measure yourself whith the cams out of the engine.

[chapl]

cheers genkin

i will double check the lift

[chapl]

still here

[tysonke70]

The lift and duration is indented on the back end of the camshaft. can you post some pics of the journels, and end of the cams which has the info on duration and lift,

[jctwincam]

Fancy a swap for some NEW Tighe 292 (7.67mm lift) & 300deg (8.25mm lift) cams (suit shim over bucket) both have dizzy drive cut on 'em. was for a circuit 7AGE project - now defunct.

http://www.tighecams.com.au/cars.htm - follow links to toyota -> twincam

cheers
Justin

[stefan]

kane i need cams

[chapl]

Fancy a swap for some NEW Tighe 292 (7.67mm lift) & 300deg (8.25mm lift) cams (suit shim over bucket) both have dizzy drive cut on 'em. was for a circuit 7AGE project - now defunct.

http://www.tighecams.com.au/cars.htm - follow links to toyota -> twincam

cheers
Justin[/b]

sorry no thanks

[chapl]

kane i need cams[/b]

pmed man

[jctwincam]

No worries chief. just a bit of a brain fart thats all.

good luck with sale

[robert nguyen]

i'm noob.. these can't go into 20v ay

[Joel-AE86]

^^^definitely not on the intake side...dunno about exhaust side, but i'd be doubtful.

[chapl]

these are the only pics i got

[grassworkzgarage]

dont these also need a valve upgrade= shim buckets/under buckets valve springs to run or can u use stock everything & just chuck'm in?

[chapl]

^you could just chuck them in... but would advise getting new springs etc

still here

[chapl]

bump

[kaibeecee]

they're 8mm, so you at first stage wouldnt need shims/buckets. these are within the standard reach. But it would later be advised to get springs.

[SEXY 16]

just stick them on e bay lad
they wont fit the kids 4acs lol

[chapl]

yeh true paul
havnt got an account though