Brake Adaptors 294mm Rotor RX7 calliper

[Rip it]

Hey All,

What I have here for sale is some custom CNC'ed adaptor brackets to suit a massive 294mm Rotor. These have been machined for our needs and don't know of anyone else offering an adaptor to suit 86 struts and an RX7 calliper with such a large disc. The disc retains very similar offset to that of standard, and only requires new holes drilled to suit the 86 hub. I run 15x8 negative 4 offset on my AE71 and these clear my wheels. I have the part number of the required discs, you can get these in DBA series 4000 which I run on my set up.

If the interest were there I can organise for another run of these to be done, minimum of 5 sets though.

I currently have 2 sets of these on offer for $300 plus postage, located in Tasmania. Also if I were to do a re-run I couldn't be 100% sure of the price although would be similar.

Any questions please ask.

Jake

Can see Photo's of the set up in Klusio's Build Thread:
http://www.ae86drivingclub.com.au/forums/showthread.php?t=4834

[4.5AG]

Can you use both FD and FC calipers on this bracket?

[Rip it]

Can you use both FD and FC calipers on this bracket?

Yes mate, you can.

[jy086]

will 14inch wheels still fit?

[Dom86]

i doubt it. 15's minimum.

[koulouris#03]

how does the disc mount with these adapteers in place??? i have a dodgy old setup on my car and the disc is only held in position by the calipers when the wheel is off the car.

[Rip it]

will 14inch wheels still fit?

I haven't tried with 14's, but my 15's are close so I very much doubt it, in fact, I'd say no.

[Rip it]

how does the disc mount with these adapteers in place??? i have a dodgy old setup on my car and the disc is only held in position by the calipers when the wheel is off the car.

The adaptor picks up the original calliper mount holes on the strut and the disc mounts to the hub as per it does originally.

Cheap big brake upgrade!!

[4.5AG]

Dba 42524 294 x 22?

[Rip it]

Dba 42524 294 x 22?

Thickness is correct, 22mm.

[Rip it]

One set sold pending payment. One more set on offer.

[ke35]

any chance 15x6 rims would fit over these?

[Rip it]

any chance 15x6 rims would fit over these?

It would depend on how the inside of your rim is formed, you should have the clearance being a 15, if not a bolt on spacer could possibly be an option.

[Rip it]

Still have two sets for some reason!!

Come get em!!

[Mouwt]

What discs will I need for these?

[dave2221]

read above

its a 294mm diameter, 22mm thickness 64mm centrehole

the part number is up above

read the thread before posting

[Rip it]

read above

its a 294mm diameter, 22mm thickness 64mm centrehole

the part number is up above

read the thread before posting


As dave2221 has stated, they are off a late model Mini. Also save yourself some embarresment and acutally read whats posted, the information lies within, not a personal dig, just in general.

Cheers Guys,

Jake

[Rip it]

Zenki has been in contact and has purchased a set, payment pending.

Cheers all.

[Zenki]

Found out some info hope it helps to all ???
Rotors off Mini Cooper 2007 and above and are a upgrade for the car if wanted.

Part number as stated above is DBA 42524
294mm rotor dia
22mm thickness
20mm min thickness
64mm centre hole
44mm deck hieght
4x100 stud pattern

Thanks for that Jake can't wait to recieve them.:thumbup:

[Rip it]

Alright all,
Both sets that were on offer have sold. I'm currently overseas for work and won't be back for a month or so. If there is anyone who has made contact with me about these in the last few weeks and still is interested let me know and I will have to start taking names for a re-run. I'm thinking five pairs as the minimum,

Cheers,

Jake

[Rip it]

If anyone is interested in these I have had a couple of PM's in regard to doing a re run. I will do it but need to get some more interest before I spend my time setting the machine up again. If there is any futher interest just let me know.

Cheers,

Jake.

[dave2221]

check my build thread for how they work.. very happy

[Rip it]

Thanks Dave, I'm glad you like!!

[RussianMafia000]

Hey man im intrested in a set are u still planing to make them let me know
danmotsenyat@yahoo.com

[shift_rook]

there's 2:D

[Rip it]

Ok. I have some genuine interest and would really like to get to 5 sets, worst case 3. But like I said 5 is ideal.

Interested Parties So Far:

1) Shift Rook
2) RussianMafia000
3)
4)
5)

PM me or call for any details, will PM my number if your interested.

Cheers,

Jake.

[Nic19]

might be interested depending on when you are going to get these made. need some other things before i do brakes. eg some 15's to fit them behind

[Rip it]

Hey nic19, time will all depend on the numbers and how soon we reach 5 sets. Let me know if you want to go on the list.

[shift_rook]

ey dude, cbf waitin, just gonna buy ajps stuff, sorry mate

[Rip it]

ey dude, cbf waitin, just gonna buy ajps stuff, sorry mate

Roger that, nothing wrong with Lawsons either!