PDA

View Full Version : oil cooler, flywheels, clutchs, GZE coils



Jonny Rochester
30th April 2008, 08:55 PM
T-series diff centre section only, welded locked ______$40
cleaned and welded locked, and not used since
no ratio or housing

Koni yellow adjustable shocks. A full set of 4 _____$400
to suit Starlet or Pasao. But of a good length (short stroke) to mod into a AE86.

rear disks for AE86, disks only _____$40
used

Crownwheel and pinion set for 8" HiLux diff _____ $100
4.36:1 ratio, good condition

AE86 pair of JDM front brake calipers ____ $SOLD
These have been pulled apart, cleaned, painted in grey hi-temp paint. And carefully rebuilt with rubber grease. Near new brake pads. You can also have the vented rotors if you pay the shipping.

AE86 Front fibreglass lip, new, never mounted _____ $SOLD
I didn't use this. Like a genuine one in black, only its fibreglass. Brand is written on the back, I forgot what it says.

Earls style 16 row oil cooler. Brand new ______$Deposit taken

genuine Earls oilcooler adapter/sandwich plate. Fits most Toyota engines. New never used _____$Deposit taken
Also with 2 new AN-10 alloy fittings screwed into it ready to use.

AE92/AE101 4A-GE flywheel _____ $95
a good condition flywheel I have spare. For 100kw or 20valve. 212mm. Will suit any 4A-GE.

AE86 4A-GE flywheel_____ $85
200mm

4A-GZE Exedy clutch ____ $20
used

200mm 4A clutch _____ $30
used but ok

4A-GZE twin coil packs ____ $80
I also have 1 set of genuine GZE leads to match.

Cobra Imolla II race seat ______ $400
Cost me about $800 or more. FIA approved. Fibreglass. "Wide GT" size. Very comfortable.

AE86 alloy wheels with tyres _____ $150
a full set of 5 alloy wheels from 1985 Sprinter. OK tyres.

"Twincam" leather steering wheel ____ $SOLD
very good condition. From AE82/ AE86/ AW11

AE86 "whiteline" centre piece for 2 door coupe only ____ $10

quadeyquade
1st May 2008, 12:47 AM
110 for twin cam wheel to 6450? please? ahah

Jonny Rochester
1st May 2008, 12:50 AM
I am just going to work in round figures here. How about $25 postage for the wheel.

Vezza
1st May 2008, 04:02 AM
Could I please get a few pics of the lip?

loc33e
1st May 2008, 09:49 AM
what engine is the oil cooler for johnny? can u post a pic?

eightsixboy
1st May 2008, 11:43 AM
hey mate, interested in the jdm calipers and the rotors. How much to post to vic, 3133.

Cheers.

Jonny Rochester
1st May 2008, 03:20 PM
<div class='quotetop'>QUOTE (loc33e @ May 1 2008, 08:49 AM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=525061)</div>
what engine is the oil cooler for johnny? can u post a pic?[/b]


The oil cooler fitting is the same one used on AE86/4A-GE in Europe, and AE92 and AE95, both 4A-FE and 4A-GE. This one is off a AE92 of some sort.

Jonny Rochester
1st May 2008, 03:20 PM
For the brakes, about $30 postage. About $60 postage if you want the disks also.

Jonny Rochester
1st May 2008, 03:21 PM
The lip is brand new, and is a TOPSTAGE one I am fairly sure. I think they even have a website.

eightsixboy
1st May 2008, 04:11 PM
Pm'd :greenbounce:

Jonny Rochester
1st May 2008, 07:21 PM
JDM brakes and lip are both sold pending payment.

20inch
1st May 2008, 10:21 PM
<div class='quotetop'>QUOTE (Jonny Rochester @ Apr 30 2008, 08:55 PM) <{POST_SNAPBACK}> (index.php?act=findpost&pid=524879)</div>
Crownwheel and pinion set for 8" HiLux diff _____ $100
4.36:1 ratio, good condition

AE86 pair of JDM front brake calipers ____ $SOLD
These have been pulled apart, cleaned, painted in grey hi-temp paint. And carefully rebuilt with rubber grease. Near new brake pads. You can also have the vented rotors if you pay the shipping.

AE86 Front fibreglass lip, new, never mounted _____ $SOLD
I didn't use this. Like a genuine one in black, only its fibreglass. Brand is written on the back, I forgot what it says.

AE92 oil cooler setup ____ $80
Complete setup, with oil filter adapter on the block, and good condition oil cooler, and fitting for the sump.

AE92/AE101 4A-GE flywheel _____ $95
a good condition flywheel I have spare. For 100kw or 20valve. 212mm. Will suit any 4A-GE.

AE86 4A-GE flywheel_____ $85
200mm

4A-GZE clutch ____ $20
used

200mm 4A clutch _____ $30
used but ok

4A-GZE twin coil packs ____ $80
I also have 1 set of old/genuine GZE leads to match.

Cobra Imolla II race seat ______ $400
Cost me about $800 or more. FIA approved. Fibreglass. "Wide GT" size. Very comfortable.

AE86 alloy wheels with tyres _____ $??
a full set of 5 alloy wheels from 1985 Sprinter. OK tyres.

"Twincam" leather steering wheel ____ $120
very good condition. From AE82/ AE86/ AW11

AE86 "whiteline" centre piece for 2 door coupe only ____ $10[/b]

Pick of oil cooler to kzilla AT Bigpond DOT net DOT au please.

quadeyquade
2nd May 2008, 12:26 AM
so how much all up did you want for that?

Jonny Rochester
2nd May 2008, 02:10 AM
$110 + $25 = $135 for the steering wheel.

eightsixboy
2nd May 2008, 01:50 PM
brakes are mine :greenbounce: .

muncher
2nd May 2008, 04:02 PM
Never mind i'm an idiot, free bump

Jonny Rochester
2nd May 2008, 09:49 PM
Steering wheel sold. Most stuff added.

Jonny Rochester
7th May 2008, 12:33 AM
New stuff added.

dustyae86
7th May 2008, 08:54 AM
the 212mm flywheel, will that fit a GZE? early one from an aw11?

Jonny Rochester
7th May 2008, 06:28 PM
It is not a GZE flywheel. The GZE one looks different and is a different size. This flywheel is off a 100kw, or a silver 20 valve, but I think you could use it on a GZE.

I may have a GZE flywheel, I will just check.

dustyae86
8th May 2008, 09:00 AM
I already have a 200mm on mine and just wondering if it will fit and I get a bigger flywheel :)

Vezza
8th May 2008, 02:15 PM
Just remember you'll have to get a different clutch as well.

dustyae86
8th May 2008, 02:28 PM
yeh I know that, the exedy one in mine is pretty gay at the moment