RT40Corona4AGTE
31st July 2011, 04:16 PM
For sale is a set of four (4) new Siemens fuel injectors.
Have only been fitted into a fuel rail, pressurised rail, never been fired, only used to set static fuel pressure. These are now surplus to my requirements as I got them with some other gear I bought as a package and dont require them.
Located in Rockhampton North, QLD, 4701.
$300 plus post!
Injector Info:
Manufacturer : Siemens DEKA
Low Impedance
Manufacturer P/N: FI11445
Static Flow lb/hr (n-Heptane): 74.7
Static Flow cc/min: 769
Static Flow Tolerance +/-%: 4%
Dynamic Flow (mg/pulse): 16.9
Dynamic Flow Tolerance +/-%: 4%
Coil Resistance Ohms: 2.35
Spray Pattern: Pencil
Connector Type: Minitimer (Bosch EV1)
O-ring Type: Viton
These are advertised on other forums as well, first in best dressed!
Have only been fitted into a fuel rail, pressurised rail, never been fired, only used to set static fuel pressure. These are now surplus to my requirements as I got them with some other gear I bought as a package and dont require them.
Located in Rockhampton North, QLD, 4701.
$300 plus post!
Injector Info:
Manufacturer : Siemens DEKA
Low Impedance
Manufacturer P/N: FI11445
Static Flow lb/hr (n-Heptane): 74.7
Static Flow cc/min: 769
Static Flow Tolerance +/-%: 4%
Dynamic Flow (mg/pulse): 16.9
Dynamic Flow Tolerance +/-%: 4%
Coil Resistance Ohms: 2.35
Spray Pattern: Pencil
Connector Type: Minitimer (Bosch EV1)
O-ring Type: Viton
These are advertised on other forums as well, first in best dressed!