WTB: Blacktop A/C compressor and bracket

[_sawyer_]

As above, surely someone has one laying around from a conversion. silver top would proberly fit to
Would very much prefer to pick up from vic but im open to anything.

Cheers
Paul
0417585108

[Sam-Q]

I have one that I modified to suit a rear wheel drive mount, is that what you have in mind

[_sawyer_]

Ya, I bought a 16v a/c kit off marvis, and the 16 valve a/c compressor bolts up but dosent line up with the balancer correctly so i was hoping to get the origional blacktop one with the rest of the kit and use the tensioner on the b/t bracket. (no power steering)
I havent mucked around with a/c before but i would assume it should work

[Sam-Q]

I just finished with this conversion, if you use the 20v compressor bracket you need to modify it to suit the rear wheel drive bracket and also you have to use the 20v compressor. You can't fit a 20v compressor onto a 16V bracket and vice-versa as the bolt spacing is different. The only way to use the original compressor is with the 16V compressor and then use the 16V pulley with 3mm shaved off the face. I can do this for $10 if you want it. You need a RWD pulley though

[_sawyer_]

I dont quiet understand, why do you need to modify the 20v bracket to suit the rear wheel drive bracket?

[Sam-Q]

I dont quiet understand, why do you need to modify the 20v bracket to suit the rear wheel drive bracket?

because it doesn't have provision for the rear wheel drive engine mount bracket off the block

[_sawyer_]

oh sorry, you meant the 20v bracket needs to be modded to fit near the RWD engine mounts, ya ive ground away a small part of it and it seems to fit now. cheers for your info

[_sawyer_]

Still looking

[terryo]

i have the parts straight off a 20V black top engine. $150 for both bits incl shipping. phone me if you want them 0417-687161, terry