hall sales
12th June 2009, 02:32 AM
Items in SA
14X7 5 stud rims 0off with 215-65 tyres @ 80% even to suit torana/volvo or similar stud pattern $200
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090930.jpg
R31 left and right 28 spline axels $20 each
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090921.jpg
L24E engine and auto trans + pump 170,000 $150
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090923.jpg
R30 170,000k dash cluster $50
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090897.jpg
2X 225-50-R16 bridgestone G3 tyres with 60% even no camber use $50
2X 225-50-R16 falken semi slicks 40% even $50
CA18det stainless exhaust mani to suit external gate, perfect cond (going back to internal) $200
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090850.jpg
R30 low King springs front + pedders rear and after market Munroe shock absorbers (under 5k use) $150. (only 1 rear in pic)
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090929.jpg
-1X B&M line locker for not destroying your brakes whilst spinning the rear wheels. $160 installed and rear brakes bled
-R31 S3 tinted front indicators from front of this $20ono, $30 posted
-JDM BLAZE universal alloy gearknob. baller knob. $60ono, $70 posted
-audioline 6.5" split system 120W rms $150. cost $260 in mid 08' (blue kevlar cone)
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090936.jpg
Whiteline Nissan bluebird 910 aftermarket front swaybar with linkages and bushes
$150
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090954.jpg
-Full wiring kit for amp with all wires $15
-Pioneer Sub and pioneer compact box unsure of model 250wrms or over $75
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090960.jpg
-response amp. 2X150wrms. only works in bridged mode $100 . (or 15" sub n amp for $180)
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090937.jpg
-Some 2way amp, around 350wrms bridged (160wrms per channel normal) $60
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090963.jpg
pair of rims with sumitomo 195-50-R15 tyres @ 70% 15X7 +20 clear r32 brakes easy. stealth as, or just remove paint with wax and grease remover to restore them. $350
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090218.jpg
-pioneer 2way 6inch $35
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090933.jpg
-Greddy catch can with oversized fittings and drain arrangement. $75
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090957.jpg
R31 skyline/pintara with RB20 turbo back 3" mandrill bent Exhaust with muffler or side pipe option in stainless steel. System finishes before the differential. Muffler is Lukey race stainless series
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090951.jpg
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090945.jpg
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090949.jpg
$350
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-Also can do 2.5" and 3" mandrel bent exhaust systems now as i have thrown 2k at a mig welder. 4" exhausts also possible as im doing one on my pintara. Price dependant on car but for 2.5" mandrel bent it will be approx (150-250 - pending design) no mufflers with 2 flanges. (cat/extractors back)
also doing turbo back with separate screamers, etc
doing intercooler piping in mild steel aswell. pm for quotes. design dependant on what owner wants.
14X7 5 stud rims 0off with 215-65 tyres @ 80% even to suit torana/volvo or similar stud pattern $200
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090930.jpg
R31 left and right 28 spline axels $20 each
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090921.jpg
L24E engine and auto trans + pump 170,000 $150
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090923.jpg
R30 170,000k dash cluster $50
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090897.jpg
2X 225-50-R16 bridgestone G3 tyres with 60% even no camber use $50
2X 225-50-R16 falken semi slicks 40% even $50
CA18det stainless exhaust mani to suit external gate, perfect cond (going back to internal) $200
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090850.jpg
R30 low King springs front + pedders rear and after market Munroe shock absorbers (under 5k use) $150. (only 1 rear in pic)
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090929.jpg
-1X B&M line locker for not destroying your brakes whilst spinning the rear wheels. $160 installed and rear brakes bled
-R31 S3 tinted front indicators from front of this $20ono, $30 posted
-JDM BLAZE universal alloy gearknob. baller knob. $60ono, $70 posted
-audioline 6.5" split system 120W rms $150. cost $260 in mid 08' (blue kevlar cone)
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090936.jpg
Whiteline Nissan bluebird 910 aftermarket front swaybar with linkages and bushes
$150
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090954.jpg
-Full wiring kit for amp with all wires $15
-Pioneer Sub and pioneer compact box unsure of model 250wrms or over $75
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090960.jpg
-response amp. 2X150wrms. only works in bridged mode $100 . (or 15" sub n amp for $180)
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090937.jpg
-Some 2way amp, around 350wrms bridged (160wrms per channel normal) $60
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090963.jpg
pair of rims with sumitomo 195-50-R15 tyres @ 70% 15X7 +20 clear r32 brakes easy. stealth as, or just remove paint with wax and grease remover to restore them. $350
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090218.jpg
-pioneer 2way 6inch $35
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090933.jpg
-Greddy catch can with oversized fittings and drain arrangement. $75
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090957.jpg
R31 skyline/pintara with RB20 turbo back 3" mandrill bent Exhaust with muffler or side pipe option in stainless steel. System finishes before the differential. Muffler is Lukey race stainless series
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090951.jpg
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090945.jpg
http://i165.photobucket.com/albums/u44/AH_opposite_lock/P1090949.jpg
$350
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-Also can do 2.5" and 3" mandrel bent exhaust systems now as i have thrown 2k at a mig welder. 4" exhausts also possible as im doing one on my pintara. Price dependant on car but for 2.5" mandrel bent it will be approx (150-250 - pending design) no mufflers with 2 flanges. (cat/extractors back)
also doing turbo back with separate screamers, etc
doing intercooler piping in mild steel aswell. pm for quotes. design dependant on what owner wants.