shelldrake
9th September 2012, 03:40 PM
Hi guys,
Up for sale I have some bits and pieces from my old turbo 20v setup fitted in my ta22 celica. It originally came out of an ae71, so I know there are no clearance issues in either car. This gear was used in conjunction with a motor putting out over 230 kw atw. All of this stuff is used, but in good working order. The clamps and silicon bends are not very old at all.
Would like to sell everything here in one hit - But will seperate if I have to. It's all located in Elsternwick, Victoria - But could send interstate if required.
http://i674.photobucket.com/albums/vv106/Shelldrake_2009/photo-2.jpg
http://i674.photobucket.com/albums/vv106/Shelldrake_2009/photo2.jpg
http://i674.photobucket.com/albums/vv106/Shelldrake_2009/photo3-1.jpg
-Aluminium intake plenum to suit Silvertop 4age 20v, There is a hole tapped in the bottom for an air temp sensor, will come with a 4" TO 3", 90 degree Silicon bend and two stainless heavy duty clamps to suit - $120
-Piping kit - Stainless piping, with BOV port, remaining silicon joiners(2" to 3"- 90 degree, 3" Straight - x2, 3" to 3" -90 degree) and 6 heavy duty, high quality stainless clamps(108-116-x1, 86-91-x3, 79-85-x2). It also has a small brass barb fitting in one of the stainless pipes for a waste gate pickup - $70
-Genuine Turbosmart Supersonic universal blowoff valve, with securing grub screws. -$50
Up for sale I have some bits and pieces from my old turbo 20v setup fitted in my ta22 celica. It originally came out of an ae71, so I know there are no clearance issues in either car. This gear was used in conjunction with a motor putting out over 230 kw atw. All of this stuff is used, but in good working order. The clamps and silicon bends are not very old at all.
Would like to sell everything here in one hit - But will seperate if I have to. It's all located in Elsternwick, Victoria - But could send interstate if required.
http://i674.photobucket.com/albums/vv106/Shelldrake_2009/photo-2.jpg
http://i674.photobucket.com/albums/vv106/Shelldrake_2009/photo2.jpg
http://i674.photobucket.com/albums/vv106/Shelldrake_2009/photo3-1.jpg
-Aluminium intake plenum to suit Silvertop 4age 20v, There is a hole tapped in the bottom for an air temp sensor, will come with a 4" TO 3", 90 degree Silicon bend and two stainless heavy duty clamps to suit - $120
-Piping kit - Stainless piping, with BOV port, remaining silicon joiners(2" to 3"- 90 degree, 3" Straight - x2, 3" to 3" -90 degree) and 6 heavy duty, high quality stainless clamps(108-116-x1, 86-91-x3, 79-85-x2). It also has a small brass barb fitting in one of the stainless pipes for a waste gate pickup - $70
-Genuine Turbosmart Supersonic universal blowoff valve, with securing grub screws. -$50