WTD: 4AGE 20v ST intake cam, cap plate, crankshaft timing pulley

[sillycar_chick]

Hey guys,

Im chasing an intake cam in good condition with little wear to replace mine that has a scored journal, and I also need the lower bearing cap plate that bolts to the head under the cam to go with. Will take a pair of cams if I have to and maybe even a dead head if the cams are good and the price is ok. Prefer Brisbane for these bits as the cam's a bit heavy to post.

Also after a crankshaft timing pulley to replace mine that was accidentally damaged pulling it off. FOUND

Really want to get cracking on this engine rebuild and get the car going (again) so help a chick out!

Cheers,
Dana

[pt_y2k]

Have a crankshaft pulley here $80,located in logan. 0416 821 079

[Sam-Q]

I have a pair of cams here for $30, pulleys extra.

$20 for that bearing cradle

Postage shouldn't be too bad.

Be careful changing those bearing caps as you probably meant to remachine them after changing.

That cooling kit still working for you?

[sillycar_chick]

pt_y2k: just want to check its the timing belt pulley you have? Not the water pump/alternator belt pulley :) thanks.

Sam, cams sound good, I'll talk to you about them over email since there's the other stuff I need off you :)

[pt_y2k]

Have both...:)

[sillycar_chick]

All good, just found out you can still get the timing gear new from Toyota for $40.50. Thanks anyway.