Results 1 to 7 of 7

Thread: dizzy oil leakin.. cont

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 9th January 2009, 03:10 PM #1
    redhachiboy
    redhachiboy is offline
    Junior Member redhachiboy's Avatar
    Join Date
    Jan 2009
    Name
    Alan
    State
    Western Australia
    Location
    Perth
    Country
    Australia
    Posts
    17

    Default dizzy oil leakin.. cont

    posted this thread before the site went thru the portal and it didnt come out the otherside (i guess with everythin else!) and i lost all the info in it

    Pretty much got an oil leak out of the dizzy - i think the seals busted..

    A few people offered their advice about what to look out for when fixing it and it was gladly appreciated.

    Couple of things i wanted to know were: 1) what main things to look out for and do when going in to operate? and 2) where do i buy replacement seals/rings from?

    cheers again for the help!

    al
    Reply With Quote Reply With Quote
  2. 9th January 2009, 03:13 PM #2
    n00bvak
    n00bvak is offline
    Senior Member n00bvak's Avatar
    Join Date
    Dec 2008
    Name
    Novak
    State
    WA
    Location
    SOR
    Country
    Australia
    Posts
    273

    Default

    repco should have seals or go to toyota for fully hecktic manufacture spares prices
    --- All your base are belong to Phil Bradshaw!!! ---
    `
    <<< blog >>> build thread<<<
    Reply With Quote Reply With Quote
  3. 11th January 2009, 04:44 PM #3
    doony
    doony is offline
    Senior Member doony's Avatar
    Join Date
    Dec 2008
    Name
    Dan
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    357
    Send a message via MSN to doony

    Default

    i got my dizzy o ring for under $4 from toyota inner and outer. had it in stock and ready to go.
    Last edited by doony; 11th January 2009 at 04:48 PM.
    but it pisses me off when people assume your hooning cos your car is loud, has bald tires, a roll cage, fresh bake and dinted bumpers!!
    Or driving in a wolf pack.
    Reply With Quote Reply With Quote
  4. 16th January 2009, 01:10 AM #4
    redhachiboy
    redhachiboy is offline
    Junior Member redhachiboy's Avatar
    Join Date
    Jan 2009
    Name
    Alan
    State
    Western Australia
    Location
    Perth
    Country
    Australia
    Posts
    17

    Default

    yep that was the thread doony.. cheers!

    well its all done.. took me all day but hey learned a few new things

    odin auto's ended up having the right inner u-seal (part no. 400704N) and i 'pandered' and just got an o-ring from toyota- but found out later odin had one anyway.. (both $7.20)

    Click image for larger version.  Name: sideonleak.JPG  Views: 19  Size: 48.8 KB  ID: 870
    oil leakin out bottom of dizzy

    Click image for larger version.  Name: oil.JPG  Views: 15  Size: 92.6 KB  ID: 872

    Click image for larger version.  Name: dizzygear.JPG  Views: 16  Size: 46.8 KB  ID: 871

    sorry no pics.. but both ring and u-seal were hard an knackered!

    probably most tricky part was getting the dizzy gear off, had to drill out the pin in one end and punch it out (cos its mushroomed out on both sides) - was told if u try and punch it out without drilling you risk making a mess of the shaft and gear.. then replaced everything an yeh just stuck a roll pin in with abit of loctite .. sweet as!

    marking everything helps big time
    Reply With Quote Reply With Quote
  5. 19th January 2009, 11:34 PM #5
    doony
    doony is offline
    Senior Member doony's Avatar
    Join Date
    Dec 2008
    Name
    Dan
    State
    WA
    Location
    Perth
    Country
    Australia
    Posts
    357
    Send a message via MSN to doony

    Default

    good to hear mate!
    learning is invaluable.
    but it pisses me off when people assume your hooning cos your car is loud, has bald tires, a roll cage, fresh bake and dinted bumpers!!
    Or driving in a wolf pack.
    Reply With Quote Reply With Quote
  6. 20th January 2009, 12:39 AM #6
    marvis
    marvis is offline
    E-Famous (Remeber your roots)
    Join Date
    Dec 2008
    Name
    marvis
    State
    QLD
    Location
    Lower Brisbane
    Country
    Australia
    Posts
    7,814

    Default

    Good to hear it's fixed.
    Reply With Quote Reply With Quote
  7. 1st May 2010, 08:47 PM #7
    vivioman
    vivioman is offline
    Senior Member vivioman's Avatar
    Join Date
    Dec 2008
    Name
    Vernon
    State
    WA
    Location
    Aveley
    Country
    Australia
    Posts
    217

    Default

    I had the same problem as well...leaky distributor, but the O-ring was fine when the distributor was removed...turns out that the inner seal was dry and brittle, so probably the sealing effect was compromised.

    I got the part from Statewide Bearings (very effficient guys) for ard $5. This is the inner seal (also known as TC10/20/7 - I got to know this from another forum, didn't see this post previously):

    Reply With Quote Reply With Quote
« Headlight retractor relay ae86 | from vic to wa! »

Similar Threads

  1. 4age dizzy oil ring seals
    By jmae86 in forum Technical - Questions
    Replies: 12
    Last Post: 18th August 2012, 11:09 AM
  2. WTB: 4agze dizzy or 4age bigport dizzy
    By Sleeper86 in forum Cars or Parts Wanted
    Replies: 2
    Last Post: 19th July 2012, 07:25 PM
  3. New Trueno (cont from old forum)
    By pj_black Knight in forum AE86 Owners Forums
    Replies: 24
    Last Post: 5th May 2009, 02:29 PM
  4. WTB: MR2 Dizzy or AE82 Dizzy
    By ae86driftstyle in forum Cars or Parts Wanted
    Replies: 1
    Last Post: 19th June 2007, 01:45 PM
  5. Dizzy oil leak
    By wide s13 in forum Technical - Questions
    Replies: 6
    Last Post: 26th May 2006, 10:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules