Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: ideling issues

  1. #1
    Senior Member BLACK COUPE's Avatar
    Join Date
    Dec 2008
    Name
    Joe
    State
    QLD
    Location
    Bellbowrie
    Country
    Australia
    Posts
    330

    Default ideling issues

    hey guys, had a drift day at qr today, car ran fine all day, but as i started it up to go home it didnt want to idle, when the engine is cold it hunts from about 500 rpm to 1500 rpm, and as soon as its warmed up it dies, ive checked all the hoses and lines etc i cant seem to find any leaks, it seems to drive ok, no power loss etc, but as soon as i try to let it idle it dies, just wondering if any one has had the same thing happen? i am aware its almost immposible to diagnose some one elses problems by just reading a post lol but im just after a point in the rite direction

    cheers, joe
    stay classy

  2. #2
    Senior Member Paul's Avatar
    Join Date
    Dec 2008
    Name
    Paul
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    274

    Default

    holy shit this is what happend to haos car today when we drove home.

  3. #3
    Senior Member BLACK COUPE's Avatar
    Join Date
    Dec 2008
    Name
    Joe
    State
    QLD
    Location
    Bellbowrie
    Country
    Australia
    Posts
    330

    Default

    gay, must have been some fuking ideling ferry being a cunt!!! does he no wtf is going on??? its kinda annoying not being able to stop with out reving and looking like a wang lol
    stay classy

  4. #4
    Senior Member
    Join Date
    Dec 2008
    Name
    Trev
    State
    Queensland
    Location
    Redbank Plains
    Country
    Australia
    Posts
    401

    Default

    Do a diagnostic test, Black coupe also check your water level (how long has it been hunting) and make sure your map sensor hose has not fallen off.

  5. #5
    Senior Member BLACK COUPE's Avatar
    Join Date
    Dec 2008
    Name
    Joe
    State
    QLD
    Location
    Bellbowrie
    Country
    Australia
    Posts
    330

    Default

    cheers trev084, tried to do the diagnostic test but i have a aftermarket ecu and it dosent want to play ball, cheked the map sensor seems to be fine, and water is ok (not to low) cheers for the feed back mate. if all else fails i may just take it to the local garage.
    stay classy

  6. #6
    Veteran hao.'s Avatar
    Join Date
    Dec 2008
    Name
    Hao
    State
    QLD
    Location
    South Brisbane
    Country
    Australia
    Posts
    1,170

    Default

    I too have this mysterious problem....although I brought it upon myself

    I'll let you know when I find out what's wrong with mine man.

  7. #7
    E-Famous (Remeber your roots)
    Join Date
    Dec 2008
    Name
    marvis
    State
    QLD
    Location
    Lower Brisbane
    Country
    Australia
    Posts
    7,814

    Default

    Ah so that was your coupe. It's clean as.

  8. #8
    Senior Member BLACK COUPE's Avatar
    Join Date
    Dec 2008
    Name
    Joe
    State
    QLD
    Location
    Bellbowrie
    Country
    Australia
    Posts
    330

    Default

    lol cheers hao good luck.

    cheers marvis
    Last edited by BLACK COUPE; 13th January 2009 at 09:48 PM.
    stay classy

  9. #9
    Senior Member
    Join Date
    Dec 2008
    Name
    Trev
    State
    Queensland
    Location
    Redbank Plains
    Country
    Australia
    Posts
    401

    Default

    What garage are you going to take it to?

  10. #10
    Senior Member BLACK COUPE's Avatar
    Join Date
    Dec 2008
    Name
    Joe
    State
    QLD
    Location
    Bellbowrie
    Country
    Australia
    Posts
    330

    Default

    just the local mechanic, do u have a place in mind????
    stay classy

Page 1 of 2 1 2 LastLast

Similar Threads

  1. still got smoke issues
    By Nic19 in forum Technical - Questions
    Replies: 5
    Last Post: 10th November 2009, 10:42 AM
  2. wiring issues
    By Faceplant456 in forum Technical - Questions
    Replies: 7
    Last Post: 19th October 2009, 05:03 PM
  3. Adaptronic issues
    By gaffa in forum Technical - Questions
    Replies: 5
    Last Post: 13th October 2009, 06:27 PM
  4. Cooling issues
    By Blizzerd in forum Technical - Questions
    Replies: 4
    Last Post: 9th October 2009, 08:00 PM
  5. 20v Issues
    By sonsta in forum Technical - Questions
    Replies: 8
    Last Post: 25th December 2008, 12:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •