Mate, are you interested in just selling the T50 separately? Is the T50 a 22 spline output?
Regards Wayne
My brothers corolla project is not going to happen so he is selling the lot.
T50 fully rebuilt with new syncros,bearings and seals.Has clutch fork and slave.
AE71 pedal box,clutch master,pipe,front crossmember,g.box crossmember,t.shaft.
Brand new unused custom radiator.Bolts straight into a KE and hooks up hoses from your 20v,modified heater matrix for KE that will not foul cas cover on 20v.
MA60 struts built by road and track to suit KE70. AGX inserts and 8kg springs.
Complete 20v motor.This motor was running in La rolla but develloped a miss and blew the water out of the radiator,no knocks or smoke,Suspected BHG.It has new ae71 mounts,backplate,starter.Also kaizen water jacket and a sandwich plate.
Grubby little flat front corolla.All the usual vices.Interior is crap,no back seat or engine but as good as complete otherwise.It has csx alloys.
Recod steering rack.
He is selling this as a package $1800.00.You will need a car trailer and a ute to pick up as some parts are already removed.The car is at Bellbird park near Redbank plains,(QLD).Phone 32884129 or pm and i will reply asap.Brad.
Last edited by 20v_kid; 1st February 2009 at 01:10 PM.
Mate, are you interested in just selling the T50 separately? Is the T50 a 22 spline output?
Regards Wayne
Hi Wayne.I will have to drop the tailshaft to check the spline. I will get back to you as soon as i know.Brad.
Yes It is a 22 spline output. $300.00
Last edited by 20v_kid; 31st January 2009 at 04:50 PM.
If Wayne doesnt move on it ...$$$ posted to Adelaide? PM please...
Sorry folks,phone no has been corrected. As there is no interest in the package he will sell off the parts seperatly. If you want a small part will post at your cost. If its a big bit he will package securly for trans but you organise pickup. Brad.
Last edited by 20v_kid; 1st February 2009 at 07:31 AM.
how much 4 the engine loom and computer
Hi Kev.We do not have a comp/loom as the motor was never fitted. It was his intention to rebuild then fit a aftermarket system. The motor with all the parts mentioned would be $400.00. Thats the long motor,flywheel,ae71 mounts(new) throttle bodies,sandwich plate backplate, Kaizen water housing and starter.This would be pickup only.I will post picks in about 15mins.
Last edited by 20v_kid; 1st February 2009 at 12:02 PM.
1 more. This has done about1000km on a new tbelt,tensioner and wpump.
Last edited by 20v_kid; 1st February 2009 at 12:20 PM.