S and T series diff info

[JAM533]

ok measured my axle's today, diameter of 23.8mm, so from what i know this is zenki. if someone can confirm this it'd be a huge help =)

[Turkish-86]

im running a 4agte and it blew the crown wheel and pinion(no teeth left on the pinion) but it lasted a fair while. there strong but not bullet proof.

[Craved]

Going by the list on page 1, an S315 diff as per my VIN plate would be a LSD?

[Patric]

A Majority of the diff info you want can be found here. Thanks wayback machine.

JAM533: Axles size info found here

[-ollie-]

I have been looking all morning, but I cant find what ratio my ke70 is. Its an 1982 manual wagon, k-50 (5 speed). Some people say that its different to the ae71 borgie's, and it differs between 4 and 5 speed ke70 boxes.
Can anyone shed any light?

[Patric]

Have a look at the code on plate on your firewall.
Check cose at above link. It will tell you ratio.

[s14seriesII]

Code should be 282... For a 4.3, 2pinion open centre, small chance it could have a 4.1, but I doubt it

[odessy]

Would like to confirm that a t series from an ra60 is a straight bolt in swap? Think I have found one I can pull the diff out of, do I need the handbrake cable or anything else from it?

[johl]

yes i pulled one out at the wreckers and used it. there are rumours being spread that the trailing arms dont line up or some shit but that is entirely false as i have done it. as for handbrake cables i cant remember which ones i used but better grab them just incase

[Jacobxxx]

They line up but aren't ra60 a wider diff opposed to a t18 item?