caster rods and and swaybar sorry. slightly further back.
Ae86 vs Mx73 v Ke55(same as xt130)
mounting points where? the mounting for the castor rod or the steering arm itself?
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
caster rods and and swaybar sorry. slightly further back.
Ae86 vs Mx73 v Ke55(same as xt130)
i have some xt130 lca's and p/s arms, should i get longer rack ends/tie rods or would the stock items have enough adjustment?
the stock ones work well
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
Johnny mentioned lock spacers before, but haven't heard anything since...
If I put KE30/KE55 LCA's in my AE71, with an AJPS lock spacer on the rack, everything such as castor rods and sway bar and ball joint will bolt directly up, and I wont need to get different tie rod/rack ends...correct?
If so, and then I put p/s arms on, would I then need to change tie rod/ rackend?
Stock tie rod ends will work with or without power steering arms with the above setup
and everything will directly bolt up?
yes.
power steering arms will only work with ae86 struts. not ae71....
Interesting...I will be going 86 coilovers very soon so everything should fit well then...cheers
i'm running te72 LCA's on xt130 struts in an st141......with about -1 camber
the te72(t18) arms are the same length as ke70/st141 etc.....but,where the ball joint is they bend up on more of an angle?! hence creating negitive camber.....Or so I've found!
Don't quote me on that!
-----------------Independent--------------------
43ger
Performance
SINCE 2008