i put some from an ae82 seca in and they were good!! Slightly longer but i found they actually held the hatch a bit higher and stopped me from banging my head like i did with the standard ones
Not listed with Monroe.
Does anyone know the closest thing that fits?
The one in my hand is 600mm long.
From what I have looked at so far, it seams T-18 or AE82 or RA60 would be very close.
i put some from an ae82 seca in and they were good!! Slightly longer but i found they actually held the hatch a bit higher and stopped me from banging my head like i did with the standard ones
^ exactly what i have. Put them in around 3 years ago and there still strong
Do they need any modificaions to fit them?
Do you have the standard ones still? If so get them re-gassed. They are of much higher quality than monroe and will probably last longer.
i had a guy fit some for me. from sydney.
$90 for new.... i could find out.....
Also said he could do bonnet gas struts for $150
here you go
give him a call.... average english
good price adn service
![]()
I know you can get them regassed. But while taking my car apart I had to hacksaw through one of the ball joints. It was rusted, and the hex was rounded.
But I maybe able to get a new ball joint yet, not sure.
I am fairly sure RA40/RA60, TE72, AE82 are all the same style, just different lengths. I have a feeling AE92 ones have different joints.
well that was $90 NEW
i got quoted $80 to get them regassed..... so yeah this was a better option
strong enough to hold the hatch AND a MDF parcel tray with 6x9's with ease.
Well, his map of Australia leaves out Tassie. If there is something written on your struts, that may help me. What brand?