how much is the retail price on your new susp setup also do 15 inch rims throw out your spedo a bit
No idea on the retail of the suspension, ring up a local pedders and ask for a quote, all the part numbers are there, not sure what you would do about front shocks coz they were custom.
As for the 15's, they didnt throw the speedo out by much as being a lower profile they are almost the same rolling diameter as the stocko, i think 195/50/15 are even closer than mine.
Well kiddies, Since the last update i have:
a 100mm boss kit which is currently in the post as well as a momo suede steering wheel with a bit of dish
a 4.1 outta a Ta22 in a t-18 diff housing with corona disc brakes, has taken a bit of effort with relocating shock mounts and getting custom brake lines for it but its now ready to go in.
Cheers
Shtock
sweet, a bought mine with MX rims on it too, never had any problems witht the speedo being out.
Nice clean car. look forward to seing it at the 86 meeting in dec!!!
Nice diff man
Well the R32 master cylinder and complete rear end is in now.
I have had a leaking master cylinder for a while (about 6 months) and have just been topping it up with fluid.
Well, i bolted the new master up and pumped the pedal and had to pump for about 5 mins to get all the fluid out of the booster, i reckon there was about 1 litre in there Laughing
But the master is a direct bolt up. I threw away the normal junction thingy inside the engine bay and just bent the lines to the new master, no cutting or joins required, was very suprised.
With standard brakes on the front and the corona on the back it has a fair bit of rear bias which makes it fun to set up for a corner with. I Will be upgrading the fronts to RX7 calipers soon and will get a bias valve if its still bad i guess.
So fun fun fun basically.
Cheers
Shtock
nice wheels. you don't see that too often.
very clean car.
I have gone for some more bling, passenger door handle was stuffed so and I heard that SV21 door handles were a direct bolt up and they are chrome.
Well...they do bolt up, but the rod is on the wrong angle to meet with the handle and all sorts of stuff, thanx to my bro we got it sorted and this is how it looks.
Cheers
Shtock
Thats pretty sweet looking, nice job on all the work so for to
Looks in good condition. How did the diff conversion go?
Cheers
Posting Permissions
Originally Posted by mild seven
