The axles on them are supposed be the same spline/size as a kouki axle. Depending on where you got yours from it could be 1410, 1415 or 1445mm wide mounting face to mounting face.
Kaizen used to do bolt in diffs for a good price, don't know if they still do.
No LSD's for them.
They will hanlde 300rwhp but you might be getting to the higher end of the power handling if you belt the shit out of it(drags). I'm still going to use one for my car until I can find an F-series.
ah ok. interesting.
havent had a chance to measure mine yet.
no lsd is no problem, i was going to lock it anyway.
apprently some taragos have e series also so i might raid the wrekers and see if i can get some different ratios happening.
should be alright...
I'll say your diff is 1410 wide since the cars that they come out of are rare as. If it's a Tarago diff, it'll be 4.1 or 4.3. If you are unlucky (or lucky) you will have a 4.778 from a CM35 Liteace(width unknown).
Everything else is 3.9 except for MX62 which is 3.7.
yeah, mines from a mx62 cressida and its a 3.7 i belive.
might try and get a tarago 4.1 centre and some spare axles, just in case.
I've searched and got donuts.....
For the t series (mainly t-18), I've heard that the front diff from a
4wd diesel townace van (4.7) fits!!
Can anyone confirm?
Also confirm which exact model of townace?
I might be easy (cheap) way of getting a higher ratio.
ive got an E series in my car at the moment however the mounts were swapped over for use in a celica so the upper arms are a few mm out. its a decent diff, bigger than T but smaller than F, i also have disc brakes on it with internal drum handbrake so the brakes are tops. been using it for years with the trailing arms the way they are with no problems. also has traction bracket mounts on the bottom.
if anyones considering one i think its a good upgrade as long as you dont want lsd, few ratios available too.
ill prob sell mine in the near future tho.
found a whole heap of Eseries diffs in taragos at the wreckers on the weekend.
two differnt ratios too what ive already got so might have too go and get em both at some stage, and mabey a set of axles for good measure. - if they are the same length as my mx62 ones.
mx62 is 1445mm wide, tarago is 1410 so you're out of luck on that one.
ah well, centre it is then.
might have too search around for a mx62 too steal spare axles from then.
...
Posting Permissions
