carramrod!! 4agte 20v ae71

[350hp4agte]

thought I mite post it back up I’ve been slowly building this car for a while now it’s getting there I almost have everything I need to finish minus a few bits an pieces

The car is an AE71 slant front

Mods

Engine: 20 valve st

weisco forged pistons 8.9:1 30thou over
Argo rods
ACL race series bearings
ARP head, crank and rod studs
Cometic steel head gasket
The head has been extensively ported
Has yager performance valves and valve springs
Kelford cam, cams
JUN adjustable cam gears
550cc usdm 2j injectors
Magnafuel regulator
T2871RS disco with .64 rear ar (will be externally gated tial 44mm gate)
HALTECH E8 ecu
LS1 coils

Drive line:

W57 supra box
Ajps bell housing
Internal slave (as in no clutch fork thing it’s all inside the box )
Direct clutch performance 5 puk unsprung brass button
Mick’s performance clutches lightened flywheel
Diff is a modded hilux with 4.3 gears r31 shafts, discs and brakes

Suspension and wheels

Cusco front and rear strut braces
S13 front coilovers (chasing new inserts)
Cusco camber tops
Custom made rose jointed LCA's
Custom made rose jointed caster arms
whiteline adjustable swaybars front and rear
trd 8 way adjustable rear shocks
trd 7kg springs
GILLY supplied 4link
Wheels are RS8's 15x6.5 +20 (there away at the moment getting modded to 15x9.5 )
and MARCH SPORTS 15x7 + - 0

body:

I haven’t done much to the body yet just stripped it no deadener etc
I plan I pumping the wheel arches to fit the 15x9.5's
It’s getting a full cage weld in type with side bars overhead bars etc
I plan on painting it nissan micra blue at this stage but I’ll probably change my mind I’ve also go the seats already sitting on bride rails so they sit nice and low.

That’s about all I can think of at this stage let me know what ya think I’m open to any criticism and I’m happy to ask any questions





















cheers

[350hp4agte]

i only got the engine back last weekend here's a pic

[ae71neo]

Sounds like this would move! Good luck with it all

[corknose]

what lca's u got in?

[350hp4agte]

modded s13

and cheers ae71neo

[Hokey]

any photo's of the lca's? u build them urself? want to make my own and need some ideas.

cheers

[350hp4agte]

the lcas are still in the jig doing some R&D i'll got photo's up at a later date

In other news i bought another ke70 flat font today $100 very minimal rust has a very minnor ding in the front no biggy hardly any damage

im also in the prosess of buying brand new t18 bumpers (see how we go tho!!)

[350hp4agte]

update engin is in yay well in for a little while its in so all the gear can be made for it then out for paint
gearbox is in, gearbox cross member made
decided to use a full custom made plenum now with 770cc injectors (on there way) the boys at work are making me a 25mm thick intake flange and also the bosses for the injectors so that should save me some money there i bought a 90mm BMI throttle body a 13row oil cooler.
Micks metal craft intercooler awsome size so so cheap
alloy catch can



alot more Photos up tomoro

cheers guys

[corknose]

looking so sweet caint wait till this is finished gunna be a beast

[R&D Mechanical]

looks fucking sick mate! cant wait to see more pics