Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Work Benches/Spaces

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Oldschool Member
    Join Date
    Mar 2005
    Name
    Roy
    State
    QLD
    Location
    Bris
    Country
    Australia
    Posts
    951

    Default Work Benches/Spaces

    Haven't seen a thread for work benches or areas.

    I've only got limited room in the garage at my place, but have about a million tools and car parts.

    Started making a work bench this afternoon, I know it's not much but it's ok for a couple of hours. Looking forward to finally having something at home. Still a few more piece to go in before I put ply on it (Bench vice and a steel plate to smack the crap out of things on, maybe a single draw for small stuff)

    I'll show you mine, you show me yours.

    Start of my bench

  2. #2
    Banned
    Join Date
    Jun 2013
    Name
    Ella
    State
    Victoria
    Location
    Ballarat
    Country
    Australia
    Posts
    8

    Default

    Your space looks much organized than mine... lolz.. anyways good work

  3. #3
    Junior Member
    Join Date
    Jun 2014
    Name
    ....
    State
    QLD
    Location
    MOUNT GRAVATT
    Country
    Australia
    Posts
    23

    Default

    Good looking bit of bench mate, got any end result pics? i have made a few in the last few months.

    What size box are you using?

    here's a littles something something i knocked up for my mate

    Started out with a bit of space

    Click image for larger version. 

Name:	start.jpg 
Views:	50 
Size:	63.4 KB 
ID:	32344
    Made some frames
    Click image for larger version. 

Name:	mid.jpg 
Views:	50 
Size:	67.3 KB 
ID:	32343
    joined frames haha
    Click image for larger version. 

Name:	end.jpg 
Views:	54 
Size:	83.7 KB 
ID:	32341

    Topped
    Click image for larger version. 

Name:	final.jpg 
Views:	59 
Size:	62.3 KB 
ID:	32342

    i was spwin he filled it with shit before i could get a pick

  4. #4
    Senior Member
    Join Date
    May 2010
    Name
    Chris
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    105

    Default

    Just a suggestion for anybody playing at home without a welder. Check out graysonline.com under the engineering section, there always seems to be some engineering company going bust. We got a pair of Tafe welding tables for $13! And I'm talking with provisions for clamps, and 40mm steel benches!

  5. #5
    Veteran stahlz_ae86's Avatar
    Join Date
    Dec 2008
    Name
    Paul
    State
    VIC
    Location
    Melbourne
    Country
    Australia
    Posts
    1,480

    Default

    Also for anybody else organising their workshops, there's some cool storage containers I've been buying from bunnings for organising bolts, washers elec terminals, grommets etc anything really. The brand is called Tactix and they are orange and black in colour, individually removable inserts they only cost about $12 each. I've got nearly ten of them now and seem to be able to find correct size bolts when I need them now


  6. #6
    Member
    Join Date
    Sep 2013
    Name
    Steve
    State
    WA
    Location
    western suburbs
    Country
    Australia
    Posts
    88

    Default

    Not having a go at you Dish, but id suggest you would need a workbench that has more mass to it for you to mount a vice and smack the cr4p outa things on it.
    unless you are putting some cross bracing in it and mounting it to a wall?

    Id suggest some beefcake wooden planks on top of the steel, and then line the planks with a sheet of ply etc if you want a flat surface and to join it all together.

  7. #7
    Junior Member
    Join Date
    Jun 2014
    Name
    ....
    State
    QLD
    Location
    MOUNT GRAVATT
    Country
    Australia
    Posts
    23

    Default


    Jim621 would be correct, i made my home bench from 50x50 box in 2.2 and sides were 75x30 in 2.2, in addition i added my vice brace/extension in 40x40 in 2.8mm wall (OTT i know but i can hang off it with as much leverage as i want and it might twist a bit)

    Click image for larger version. 

Name:	IMAG1658.jpg 
Views:	36 
Size:	342.6 KB 
ID:	32457

    This was my home workshop when i had my old place, was so happy with it, the drop saw stand was my first project haha

    Click image for larger version. 

Name:	IMAG1659.jpg 
Views:	39 
Size:	346.3 KB 
ID:	32458

  8. #8
    Senior Member billett86's Avatar
    Join Date
    Mar 2010
    Name
    Toby
    State
    SA
    Location
    Adelaide Hills
    Country
    Australia
    Posts
    135

    Default

    my bench I knocked up off some steel from work weighs a ton but seriously solid

  9. #9
    Veteran stahlz_ae86's Avatar
    Join Date
    Dec 2008
    Name
    Paul
    State
    VIC
    Location
    Melbourne
    Country
    Australia
    Posts
    1,480

    Default

    Nice one.

  10. #10
    Senior Member billett86's Avatar
    Join Date
    Mar 2010
    Name
    Toby
    State
    SA
    Location
    Adelaide Hills
    Country
    Australia
    Posts
    135

    Default

    Yeah it turned out pretty well just a bit of a bitch to move around

Page 1 of 2 1 2 LastLast

Similar Threads

  1. SWAP my 25mm spacers for your 20mm spaces
    By drft86 in forum Cars or Parts Wanted
    Replies: 0
    Last Post: 9th June 2012, 02:02 PM
  2. 2x ae86 lock spaces both brand new
    By skin in forum Car Parts For Sale
    Replies: 0
    Last Post: 11th November 2010, 12:04 PM
  3. lock spaces + side mirror
    By doony in forum Car Parts For Sale
    Replies: 13
    Last Post: 14th July 2009, 01:16 AM
  4. spaces and wheels and offsets and guards
    By roger roger in forum General Topics (No Technical Questions)
    Replies: 8
    Last Post: 10th April 2007, 08:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •