I'l take the throttle body if you'll post to Canberra?
F.S. complete T series w TRD 2 way, RWD inlet manifold, Larger ze T/B, exedy HD clutch, T3 small to big port adapter etc, GC QLD
Ok I have for sale. Parts at Gold Coast QLD
Complete T series diff with TRD 2 way LSD, 4.1 centre, handbrake cables, all mounts modified to bolt into ae86/Ke.
Diff makes no noises and locks well, handbrake worked very well.
Complete bolt in package minus driveshaft, you can use a JDM rear driveshaft or T18 rear driveshaft mated to the AUS front driveshaft for AUS ae86's.
Price: $1200 NOW $1100 SOLD
Big Port RWD manifold,
Very clean and shiny with everything seen in pic.
Price: $120 SOLD
T3 big port to small port adapter, bought this to use with the manifold above but decided to go custom inlet manifold. Never used. my loss your gain etc etc what ever, buy it.
Price: $90 SOLD
ZE suction pipe modified to suit larger 4age throttle body with 4age throttle body, the suction pipe has been bored out a bit to suit the larger T/B. good upgrade for std ZE especially if your running a larger crank pulley, allows more air flow to feed the supercharger = ruin tyres faster
This came off my ze, even though the valve stem seals were leaking as well as the head gasket in my motor my car was still faster than grants fresh built motor with exactly the same mods minus this throttle body.
Price: $120 SOLD
STD Ze inlet manifold and inlet pipe
Price: $50
Exedy HD clutch for 212mm flywheels (ae92, ae101 siver top, ae111 black top etc).
band new, in box with pressure plate, disk, throw out bearing, instructions. changed my mind on clutch set up, my loss is your gain, save $$$ over retail price
Price: $280 (paid $345) SOLD
7MGTE 395cc injectors, straight bolt in for 4age/ze/te, with plugs.
Price: $80 SOLD
Thanks for looking at my polished floor boards with car bits on it.
I will do post on items at buyers expense, or come pick the shit up.
cheers, Jase
Last edited by ae86 slide; 18th September 2011 at 06:05 PM.
I'l take the throttle body if you'll post to Canberra?
John84ie are you after the throttle body and suction pipe? Yeah I will post, shouldn't cost to much.
Yep
that diff does not appear to be modified for a KE. it stil has coil seats, not leaf spring mounts????????????
will you take the centre out so i can check it is a 2-way and not damaged??
Only wagons and pannos are leaf spring dude!
(delete mods if think not needed)
Correct me if im wrong what "modifications to mounts" have been done, thought they bolted in ??
would of really considered the diff it was you were in melb
good luck with the sale
Cheers
pm sent to buy clutch
If your car has leaf rear springs it wont bolt straight in, and if you want to come over and pull the center out to inspect your are more than welcome, like i said it has never made any noises and locks well.
Yeah they are pretty much bolt in, except the sway bar mounts which have been welded onto this, my wording was a bit off in the original post, basically it just got pulled out of my driving ae86.
Ill text you today about picking up the clutch
Posting Permissions