arn't they made for ae86 struts?
Hi guys.
I spent most of the weekend fitting my BC coilovers, T3 big brake kit, T3 lower control arms, brand new Ae86 hubs from Toyota and tie rod ends and polyurathane bushes to my Ae71 corolla. The problem is that the rotors sit too close to the brake caliper bracket and I can't even get the alloy T3 bracket mounted. There just does not seem to be enough space. I know a few of you has fitted this brake kit. Can anyone give me any advise please?
Last edited by brutus; 25th September 2011 at 05:29 PM.
arn't they made for ae86 struts?
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
Yeah mate the BC coilovers are for an Ae86. That's why I can't figure out what's going on.
The bracket goes on the other side of the stock caliper bracket.
That's how I've put it together but the rotor pushes against the alloy bracket before the hub is all the way home. From the picture it almost looks like your original calliper bracket is different to mine though.
I don't know if your comment was sarcasm or not, but the struts are different
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
No sarcasm mate. Maybe just a bit unsure of what you're asking but everything I've bought so far is for Ae86. The struts, the brake kit, the lower control arms and tie rod ends as well as the hubs. I even tried to fit the brake kit on my ae71 spindles but it's almost the same outcome. I'm pretty sure my original brake calliper mounting plates does'nt look like the picture that little red spirit posted.
He has BC AE86 coilovers is what I think he is saying. Maybe you have the bracket on backwards?
"Not all commodore drivers are wankers, but all wankers drive commodores"
ah I see, odd
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.