and if anyone knows who rebuilt the engine and done the build id love to get in contact with them on
here and have a chat about the car
all feedback welcome and remember im still new to this world haha
hey new here names karl.
been lurking on here for a month or more now only joined a few weeks ago though.
live in SA and have only recently started to enjoy the "rolla's" was always a holden boy haha
anyway picked this little bad boy up on the weekend off of tyrone908??
its an 84 model AE71, blue exterior with a blue interior reasonably clean but needs a little work like
most of the cars from that era.
Engine specs are
4AGTE
20 Valve bottom end with CP forgies and APR stud kit
Ported 16V head
forward face plenum
High flow KKR 280
external wastegate
2" screamer pipe
engine was rebuilt roughly 11,500km ago
all controlled by a Microtech ECu with an handheld controller
Mand W external ignition system
Surge tank in the boot with a 040 walbro pre pump.
also has a front mount intercooler and oil cooler
this is meant to be close to the 190kw mark on 14 psi
Drive line
JDM T50 box
6 puk clutch
Standard diff that has been welded
Suspension
AJPS springs (unknown rate)
Short stroke shocks
sigmas LCA's
Lock spacer
Falcon rear springs
short stroke shocks for the rear as well
Interior
standard seats
dished MOMO steering wheel?
this is sitting on Black MA61's up front and Black watanabes at the rear
Future Mods..
Bucket seats drivers and passengers with 4 point safety harness
Black carpet
tidy up the dash
install an oil gauge, water temp and install a rev gauge or get the original one working.
Coilovers for up front
Brake upgrade for front.. unsure what to go with at this stage..
maybe a t-18 diff for the rear and LSD
also have a set of 15x8 OG meshies to get tyres and fit
and if anyone knows who rebuilt the engine and done the build id love to get in contact with them on
here and have a chat about the car
all feedback welcome and remember im still new to this world haha
having a few starting issues seems the starter solenoid has gone!! hopefully source one this week!! *fingers crossed*
turned boost down to 7 PSI a lot more road friendly now
Last edited by sheppo; 10th October 2011 at 09:24 PM.
what psi was it running when you got it? get it suss i wana see this thing boosting down cement hill
was on 14psi
yeah one of the guys at work might have the solenoid I need if not hopefully source one by the start of next week!!
it still runs but need to be roll started everywhere..
sweet car, looks like a reasonably setup rig. good to see your input to it
awww shit awel atleast u still have the white one !
for brake upgrades there is the peugeot/hilux option, the RX7 or the wilwood setup. i search on these forums of those options will come up with enough info
thanks mate yeah she runs pretty nicely and has been set up fairly well
can't wait to add my own touch to it though and fix a few little things!!
thanks mate not too sure yeah want to tidy up interior and do coilovers and front brakes first but we will see down the track