Also of note there are pumps on ebay right now that are real cheap. One of the toymods guys bought one and it was crap in his eyes, so buyers beware!
Genuine oil pumps with the upgraded wide gears featuring the round teeth.
Also comes with base and pick-up gasket and the crank main seal.
This can be readily fitted to the earlier 4age engines that have the prone to snap square teeth.
Pic showing the size difference in width from another genuine type:
This should be of particular importance to people running 7afe bottom ends as they likely recieved this type.
These are guarenteed to be the best type available out of all the pumps.
Price: $180 inc GST
It is likely that I will also offer pumps that have been pre-ported for higher flow again for a small extra cost.
Last edited by Sam-Q; 30th April 2013 at 10:59 AM.
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
Also of note there are pumps on ebay right now that are real cheap. One of the toymods guys bought one and it was crap in his eyes, so buyers beware!
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
What sort of power/rpm can these handle??
Apparently they let go at about 9000 after a while, however I have have some TODA gears here soon, if you install them you can leave it much more
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
Awesome how far off are you from getting the toda gears? And could I have a price shipped to 5159? Cheers
I am expecting them any day now. Postage for the gears alone is $8, for the pump together it's $13
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
I'm presuming they fit all 4age? I have a smallport. If yes then I'm keen to take a pump off your hands
I have a 4GZE so assuming no issue to bolt up for me? shipping to sydney CBD?
My AE86 4AGZE to 3SGTE thread
Check out my sale threads for 4age and ae86 parts
http://www.ae86drivingclub.com.au/fo...nd-going-Turbo
http://www.ae86drivingclub.com.au/fo...ything-must-go
Sponsors
Platinum Automotive Smash Repairs - Padstow
I have compared them to a 16V and I could see no differences. Technically there shouldn't be and only the blacktop should have something externally different. Just for the record I have used internally stock silvertop engines with the same type of pump but 15+ years old and rev them to my 8600 limit almost every time their driven. I have had two crank pulleys fail but nothing else.
The pumps are $180 unmodified and $50 extra if their ported, the TODA gears also arrived today. To run the TODA gears you can get a second hand silvertop pump and put these in or buy one of mine and swap them. The TODA gears are not cheap.
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
forgot to mention $13 for the pump sent to anywhere in AU or $8 for the gears alone
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.