Reply With Quotewell i got some of those wheel nuts from u pull it expecting they will fit and nope they wont fit in the hole were the stud goes through the rim! so what should i do, drill out the stud holes a bit
Any repco will have them , or any place that sells nice products
well i got some of those wheel nuts from u pull it expecting they will fit and nope they wont fit in the hole were the stud goes through the rim! so what should i do, drill out the stud holes a bit
They should fit nicely, flip your rim over and pop one of the nuts in the hole , if it went in you might need to take a tiny bit off the edge of the front of the bolt holes ( I had to do the same to some CSA brake boilers ) because there might be a lip from trying the taperd nuts. Is it only JUST not fitting or is it way off man ?
just did that and nope not fitting still, ow would i drill them out a bit more
Is the nut really close to fitting ?
The bit that slips thru the hole in the rim should measure @ 17mm od
I don't like the chances that any wheel nuts from U-Pull would be anything close to fitting..
buy some 17mm shank nuts from Repco
yeh im going to wheel worx tommorow morning to go get some, also put on fender mirrors, garden edge front lip and cut a coil out of the front so its all starting to look alright just need my wheels and some tint!
thought i'd upload some photos of how it looks now, going to leave it until i get some money for tyres and LCA's to get some camber.
so seeing as there is little to no information about coronas i cant find anything on what LCA's fit a st141 that will give me around 2 or 3' camber, if anyone knows anything then it will be appretiated, cheers
Posting Permissions