WTS : Silvertop 20V Setup

[evil86]

WTS : Silvertop 20V Setup
Hey Guys,
My current setup is up forsale due to upgrade. It cranks first go and hasn't missed a beat. The last tune was done by Micks Motorsport making 91kwatw, I've still got the dyno sheet.

Engine comprises of :
RWD Silvertop 20v (candy red rocket cover)
Alloy crank pulley
Ally underdrive water pump pulley
Sard low tempThermostat (62 degrees)
1ZZ coilon packs
70mm samq Stacks with custom splash guard
Motec M4 ECU with Motec Ignition Expander module for sequential ignition and external 3bar sensor. Excellent wiring job done by Lawrence @ Golberg Industries (site sponser)
Jasma stainless extractors
Reconditioned alternator
4A engine bracket
Cusco lowered engine mount




I'm after $3k for the complete setup, I've also got a night parts bellhousing and w58 at extra cost but can do a deal with the engine setup.
I'm located at Liverpool and can be contact on 0420 939 656.

[the witzl]

hmmmm, tempting....

[evil86]

You know you want to Jesus...

[the witzl]

a couple of questions.... which might help me get over the line

1. Do you have a 4A to T50 bellhousing? I have a t50, but no bell house....
2. What air filters are you running with this setup? Is there a plenum, or just open stacks?
3. Is the ISCV (idle speed control valve) still fitted and tuned, or what is in place for cold start idle up control? Important for me as i would be daily driving, and need to warm up the car in driveway whilst i load in the kids
4. Is there a bit of wiggle room in the price, its a bit above my budget - happy to discuss in person if you'd prefer that (im old school)
5. What engine work, if any, has been done?

Thanks in advance

[the witzl]

.. also forgot - is there a flywheel and/or clutch included?

[evil86]

as per phone conversation.

1. I have a w58 setup for sale
2. Its running open stacks with splash guard
3. I don't run an ISCV and it cranks and runs fine
4. Open to serious offers
5. Unopen motor with all the neat bolt ons to keep it simple.
6. Clutch and Flywheel is to suit w58 setup.

[willa]

How much you after for the w58 w/ bell?

Will.

[evil86]

I'm after $500 posted just for the bellhousing, which is brand new.

[Zeedy]

Is this still available?
If so, did I read it right in regards to having a W58 box as well? If so, how much would it be to have everything? Engine, bellhousing and gearbox and then are you able to find out how much it would cost to post to Nunawading, Melbourne, 3131.
Thanks

[evil86]

SOLD