Results 1 to 9 of 9

Thread: Best Argon/CO2 mix for MIG welding AE86 steel?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member Velociraptor's Avatar
    Join Date
    Oct 2015
    Name
    Antonio
    State
    VIC
    Location
    South East Melbourne
    Country
    Australia
    Posts
    1

    Default Best Argon/CO2 mix for MIG welding AE86 steel?

    Hey everybody, first post.

    I am just learning to MIG, and am attacking the rust in my rear quarters.

    Can anybody advise me as to what the ideal gas would be? I have read that C25 (75% Argon, 25% CO2) works best for auto body work.

  2. #2
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    It's mild steel you are welding so any argon mix will work well.

    Take your time and practice on non important panels first.

  3. #3
    Junior Member ke70+ae92's Avatar
    Join Date
    Jul 2009
    Name
    Nathan
    State
    NSW
    Location
    Penrith
    Country
    Australia
    Posts
    8

    Default

    plus keep the heat low, its so easy to blow holes in such thin steel
    V6 TT KE70

  4. #4
    Junior Member
    Join Date
    Mar 2009
    Name
    Dave
    State
    NSW
    Location
    Bathurst
    Country
    Australia
    Posts
    26

    Default

    Just to add to this...Where are people getting cheap gas from?

  5. #5
    Noooob
    Join Date
    Jun 2010
    Name
    Matt
    State
    NSW
    Location
    Campbelltown
    Country
    Australia
    Posts
    5,246

    Default

    I bought a bottle for around $300 and pay $80 for a refill. The bottle is around weist high

  6. #6
    Senior Member
    Join Date
    Jan 2009
    Name
    Eddie
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    483

    Default

    Gasweld will have the purchasable bottles. Much better than hiring for the occasional user.


    Sent from my iPhone using Tapatalk
    4agte finally finished. 252rwkw with more to come

  7. #7
    Senior Member kaibeecee's Avatar
    Join Date
    Dec 2008
    Name
    Pete
    State
    QLD
    Location
    Brisbane
    Country
    Australia
    Posts
    781

    Default

    For body work 0.6mm wire is best

    75% Argon 25% C02 is preferable (aka argoshield lite/supashield 25 etc)

    purchasing a bottle and paying per refill is much better than shitty rental rates (~$12-20 per month)

    use lower amps, more wire for more solid tacks.

  8. #8
    Oldschool Member
    Join Date
    Jun 2008
    Name
    Philip
    State
    Somerset
    Location
    Mendip
    Country
    UK
    Posts
    1

    Default

    Hello, I'm just starting to mig weld too, using a 93% Argon, 5% Carbon Dioxide, 2% Oxygen (Hobbyweld 5), seem to work well when I keep the gas pressure low and weld short lengths then let it cool down.

  9. #9
    Junior Member
    Join Date
    Mar 2023
    Name
    Roeland
    State
    Warszawa
    Location
    Woloska, Warszawa
    Country
    Poland
    Posts
    1

    Default

    Hello!
    MIG welding typically uses a shielding gas to protect the weld from the atmosphere, which can cause defects in the weld such as porosity, oxidation, and contamination. The choice of gas depends on the type of metal being welded, the welding wire used, and the welding conditions.
    As you mentioned, C25 (75% Argon, 25% CO2) is commonly used for MIG welding on auto body work because it provides good penetration and a stable arc. It is also a cost-effective option. However, other shielding gases such as 100% Argon or a mixture of Argon, CO2, and Oxygen may be better suited for welding certain metals such as aluminum.
    Ultimately, the choice of shielding gas depends on the specific welding application.

Similar Threads

  1. Mig mild steel wire to stainless
    By Matt in forum Restoration / Body Work
    Replies: 5
    Last Post: 16th April 2014, 11:53 PM
  2. any interest in a short mig welding course?
    By Sam-Q in forum Melbourne & Vic Events and Discussion
    Replies: 8
    Last Post: 15th September 2009, 05:15 AM
  3. CO2 gas with a mig welder instead of Argon
    By Sam_Q in forum Technical - Questions
    Replies: 5
    Last Post: 25th June 2008, 10:44 PM
  4. Drift Mix
    By AE86.cn in forum Toyotas in the Media
    Replies: 6
    Last Post: 3rd May 2005, 05:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •