New front wheel arch, from a Volvo fender
Rear side Window glued in, need to figure out how to mount the fancy things arround
Exhaust was leaking
Had a stainless v band exhaust laying arround...
Sent from my iPhone using Tapatalk
Hey, last saturday i bougth a ke20 part car from a guy, turns out he had a ae86 there aswell, did not inspect it or anything but ended up bidding on it when i got home... so i got it in the end and Picked it up today...
Did i mention?
Got it home
Steam Washed the bay and turns out Its rust free
Got it running after i cleaned the spark plugs and re tappes them, files good but dies if i get on the throttle fast, fuel filter? Did not drive it due to the clutch not working... Bleed it so now it works but the oil is drained...
The floor is amazing judging by how the car looks on the outside
The fender is gone but everything behind and under is good... i Dont understand this car...
Hoping it will be my new daily in a few weeks
Sent from my iPhone using Tapatalk
New front wheel arch, from a Volvo fender
Rear side Window glued in, need to figure out how to mount the fancy things arround
Exhaust was leaking
Had a stainless v band exhaust laying arround...
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Very nice write up! Good to see you're not putting It on the back burner ! Love the rattlecan delorian silver colour keep it up!
Sent from my iPhone using Tapatalk
Thanks mate!
Leak in the diff... so out with everything
Stock lsd
Poly bushings
Rear bumper, tank and exhaust back on
Sent from my iPhone using Tapatalk
Swapped to kouki instrument
Ploy bushings where i needed to replace the old ones
Sent from my iPhone using Tapatalk
Last edited by RallyRolla; 6th October 2017 at 12:51 AM.
Lookin good, lovin the progress!
Makes me eager to get stuck into mine
Sent from my SM-G935F using Tapatalk
Thanks!
Picked up this Trueno from Japan yesterday
806kg without battery
Sent from my iPhone using Tapatalk
Car is set up in Japan...
Sooo old school oil temp, pressure and water temp, all analoge not a single wire! Just 2 lines of oil and one with water
New slotted and drilled all the way round, and new pads
Need to buy some paint... fibreglass hood and does, car weighs 806kg!?!
Adjustable panhard and TRD blue springs and a brace in the boot
Coilovers, RCAs and adjuatable caster rods in the front
Cusco Camberplates, strut brace and a good manifold in then bay
Old bride Seat with Stickers from japan
Got some fander flares and some suuper ligth mirrors aswell...
Bride Seat is back in now
Swapped the plugs and runs alot cleaner now... one greddy ngk plug, one Bosch and 2 denso haha
Like new
Sent from my iPhone using Tapatalk