I just did a thread search and it seems like it's a 12mm x 1.25. So I'll order a 12mm banjo with crush washers and use my stock bolt? That is , unless someone corrects me on the size....
It looks bigger than that.
Does anyone know offhand what size the banjo bolt fitting is an an '86 "big port" Bluetop on the line going INTO the fuel rail from the fuel filter?
I'm replacing my fuel lines with AN6 fittings and braided line in 3/8" from front to back and I want to have everything ready. I've seen fittings from 12mm and 12.5mm to 18mm.
This is for my KP61 and currently it has fuel lines from 1/4" to 5/16" and some of it is 3/8"....It's a real mess.
That banjo going into the fuel rail looks pretty big. But I haven't yet removed it.
Thanks.
Last edited by ZEROPILOT; 26th April 2018 at 08:12 PM.
I just did a thread search and it seems like it's a 12mm x 1.25. So I'll order a 12mm banjo with crush washers and use my stock bolt? That is , unless someone corrects me on the size....
It looks bigger than that.
Finding a 12mm metric banjo might be a problem. I've seen set ups with the stock banjo bolt used and a AN fitting brazed on to the end so the AN hose could attach while still retaining the fuel damper. davew7
Thanks Dave.
As ALWAYS!
I found a correct size (if it is correct) banjo from Russel fittings via Ebay with the AN6 end and washers.